STIT COMPANY LIMITED
บริษัท เอส ที ไอ ที จำกัด
021506833-44 (12 lines)
โพสเมื่อ
Engine for The agricultural equipment 43 - 129,9 kW  /  58 - 174 hp ,Engine ,Deutz,Machinery and Process Equipment/Engines and Motors/Engines
รหัสสินค้า
NANA-107667
ชื่อสินค้า
Engine for The agricultural equipment 43 - 129,9 kW / 58 - 174 hp
แบรนด์
Deutz
โมเดล
D 914
ผลิตที่
Germany
รายละเอียด:
These are the characteristics of the D 914:

Air-cooled 3- to 6-cylinder naturally aspirated in-line-engines
6-cylinder turbocharged, charge air cooled
Displacement: 1.1 liter/cylinder
Modular system with single cylinder units
Advanced injection and combustion system
Worldwide approved: more than 4.5 million engines in use
100 percent power take-off on the flywheel side and on the face end
Possibility of power take-off for hydraulic pumps and compressor
Only few maintenance points
Compact power-pack with low weight.

Standard specification



Cooling system:  Air-cooled with integrated axial-flow blower.
Crankcase:  Grey cast iron.
Cylinder head: Aluminium single cylinder heads.
Valve arrangement/

timing:  Overhead valves in the cylinder head, one inlet and one exhaust valve per cylinder, actuated via 

tappets, push-rods and rocker arms, driven by gears and camshaft.
Piston:  Three-ring piston: two compression rings and one oil scraper ring.
Piston cooling: Oil spray via nozzle.
Connecting rod: Drop-forged steel rod, diagonally split.
Crankshaft: Nodular cast iron with integrated counterweights.
Camshaft: Steel, seated in bi-metal bearing on the blower side.
Lubrication system: Forced-feed circulation lubrication with rotary pump which feeds both lubricating and heating 

systems (if heating is fitted).
Engine oil cooler: Integrated aluminium cooler.
Oil cooler thermostat: Oil cooler flow thermostatically controlled on engines with heating system.
Lube oil filter: Paper-type micro-filter as replaceable-cartridge full flow filter.
Injection pump/

governor: High Pressure in-line injection pump with mechanical centrifugal governor.
Injection nozzle:  Five-hole-nozzle.
Fuel filter: Replaceable cartridge.
Starter motor: 12V; 3.0 kW (standard).
Alternator: Three-phase alternator, 14V; 55A (standard).
Heating system: Optional connection for cab heating.
Options: Integrated hydraulic cooler with max. cooling capacity up to 43 kW, intake manifold connections, 



exhaust manifold connections, compressors hydraulic pumps, engine mounts rigid and flexible, 
oil pans cast in self supporting design (3, 4, 5 and 6-cylinder engines), SAE 1/2/3/4 flywheel 
housing, three-phase alternators 12V and 24V, integrated hydraulic oil cooler.

Engine type 

D 914 L3  D 914 L4  D 914 L5  D 914 L6  TCD 914 L6
Number of cylinders 

3 4 5 6 6
Bore/stroke 
mm  102/132 102/132 102/132 102/132 102/132


inch  4.01/5.19 4.01/5.19 4.01/5.19 4.01/5.19 4.01/5.19
Swept volume 
l | cu. inch  3.2|197 4.3|263 5.4|329 6.5|395 6.5|395
Compression ratio 

1:21 1:21 1:21 1:21 1:19
Maximum rated speed 
rpm  2300 2300 2300 2300 2300
Mean piston speed 
m/s | ft-sec  10|32.8 10|32.8 10|32.8 10|32.8 10|32.8
Performance for agricultural engines 1)





Power rating 
kW gross | hp  43|57.7 58|77.8 72.5|97.2 86.5|116.0 129.9|174.2
At speed 
rpm  2300 2300 2300 2300 2300
Mean effective pressure 
bar | psi  6.9|100.0 7.0|101.5 7.0|101.5 7.0|101.5 10.5|152.2
Power ratings for installed engines





Highly intermittent operation kW gross | hp 
43|57.7 58|77.8 72.5|97.2 86.5|116.0 129.9|174.2
At speed 
rpm  2300 2300 2300 2300 2300
Mean effective pressure 
bar | psi  6.9|100.0 7.0|101.5 7.0|101.5 7.0|101.5 10.5|152.2
Intermittent operation 
kW gross | hp  41|55 55|73.8 68.5|91.8 74.9|100.4 126|169
At speed 
rpm  2300 2300 2300 2150 2300
Mean effective pressure 
bar | psi  6.6|95.7 6.6|95.7 6.6|95.7 6.5|94.3 10.2|147.9
Max. torque 
Nm | lb-ft  202|148.9 270|199.1 333|245.6 375|276.6 620|457.2
At speed 
rpm  1500 1500 1500 1500 1600
Minimum idle speed 
rpm  650 650 650 650 650
Specific fuel consumption 2) g/kWh | lb/hp-hr  220|0.362 220|0.362 215|0.353 215|0.353 215|0.353
Weight to DIN 70020, part 7A 3) kg | lb  284|626.1 315|694.4 390|859.8 440|970.0 510|1124.4

คำค้นหา:
engine

บริษัท เอส ที ไอ ที จำกัด

STIT COMPANY LIMITED

25 ม.13 ต.บึงคำพร้อย อ.ลำลูกกา จ.ปทุมธานี 12150

021506833-44 (12 lines)
021506845-8

Contact: ฝ่ายขาย STIT INTERTRADE