2GB Wireless Inspection Camera with LCD Color Monitor

The 3.5" full color LCD screen allows the user to view live video from the lens. The hand held unit is powered by 4-AA batteries. The Video Monitor is powered by rechargeable batteries that are already installed in the unit. They just need to be charged. ( AC adapter is included )
Accessory Mirror allows user to see 90 degrees to axis of the shaft. The Magnet accessory will pick up approx 1/4 lb and a hook is also provided for hard to retrieve items.

Features:
  - 2.4GHz RF wireless transmission technology
  - Diameter of camera head: 9mm
  - Allows for easy visual inspections in hard to reach areas.
  - Mini water-proof camera with 1m flexible extended tube
  - Night Vision Range:1.5m
  - Waterproof Level: IP67
  - 3.5 inch color LCD monitor with build in rechargeable Li-battery
  - Monitor has SD card slot for recording, support Max 16GB SD Card
  - The camera can handle two extra extension tubes (1m per each)

Specifications:
  - Image Sensor: CMOS
  - Total Pixels: 704*576 (PAL); 712*486(NTSC)
  - Horizontal View Angle: 50 degree
  - Camera head diameter: 9mm
  - Minimum Illumination: 0 Lux
  - Modulation Type: FM
  - Bandwidth: 4 * AA
  - Dimensions: 186 * 145 * 41(mm) (Exclude Flexible Tube)
  - Weight: 530g
  - LCD Screen Type: 3.5inch TFT-LCD
  - Effective Pixels: 480 x 240
  - Video System: PAL/NTSC
  - Transmission Frequency: 2468MHz
  - Consumption Current (Max): 0.9-1.3VP-P 75ohm
  - Dimensions: 100 * 70 * 30(mm)
  - Weight: 140g
  - สายยาวประมาณ 1 เมตร

Its very easy to use and here is even a few tricks:

* If you see a bright white screen, you probably have the camera lens right up against a reflective surface that is bouncing the LED light back into the camera, creating glare. Just pull the probe back a bit.
* If you are working inside a contained area with little or no ambient light, remember that the Led's are providing the illumination. Moving the camera tip in and out a bit can improve lighting on the object for the best screen display.
* When using the mirror for right angle views, clean the mirror glass carefully with a lint-free cloth. Small specks of dirt and dust and fingerprints degrade the screen image.


FAQ

Q. Can the monitor be used on and off of the hand held?
A. Yes you can either keep the monitor mounted on the hand held or use it remotely.

 

Q. How far away can the monitor be used away from the hand held?
A. It really depends on the environment you are trying to use it in. 10ft should be expected however you may realize much greater depending on the strength of the batteries at the time and the RF interference at the location you are using the Wireless Inspection Camera.

 

Q. Is the unit water proof or can it be used in liquid?
A. The image head and cable are water resistant to a standard of IP 67 weather proof. This means the tip can be up to 1 m of submersion but the monitor and handheld must NOT be submersed in way.