TEMPERATURE SENSORS / THERMOCOUPLES & THERMORESISTANCES PT100

   STANDARD THERMOCOUPLES are suitable whenever severe operational conditions (i.e. vibrations, mechanical loads, pressure) are not present.MINERAL OXIDE THERMOCOUPLES are recommended in all applications where a fast response or a reduced dimension of the sensing element is required.THERMORESISTANCES compared to thermocouples, provide, at low temperatures, a more accurate measurement. Hence their use is recommended if the applicationrequires a good measurement accuracy and the process temperatures do not exceed 200 °C.

TECHNICAL DATA
   RELEVANT TO THERMOCOUPLESCONDUCTORS made of Iron/Constantan of Nickel/Chrome-NickelCONDUCTORS INSULATION made of fibreglass-silicone (standard thermocouples) or of compressed MgO (mineral oxide thermocouples), external sheath made of AISI 304HOT JUNCTION grounded (standard thermocouples) or isolated (mineral oxide thermocouples)OPERATING TEMPERATURE up to 700 °C (Iron/ Constantan conductors) or up to 1200 °C (Nickel/ Chrome-Nickel conductors)
   
TECHNICAL DATA
   RELEVANT TO THERMORESISTANCESCONDUCTORS made of copperCONDUCTORS INSULATION made of fibreglass-silicone or of compressed MgO, external sheath made of AISI 304SENSING ELEMENT made of a nickel or platinum resistive winding (nominal resistance equal to 100 ? at 0 °C)VOLTAGE SUPPLY 3-wires (standard) or 4-wires (optional)OPERATING TEMPERATURE from 400 °C to 700 °C depending on model