KGBP Pressure-Relief Type Grease Pneumatic Lubricator, ปั๊มจารบีออโต้ใช้ลมประเภทแรงดันระบบ PLC มีสปริง, เครื่องจ่ายจารบีออโต้ใช้ลมประเภทแรงดันระบบ PLC มีสปริง , กาจ่ายจารบีออโต้ใช้ลมประเภทแรงดันระบบ PLC มีสปริง , ปั๊มจารบีไฟฟ้าใช้ลมประเภทแรงดันระบบ PLC มีสปริง, เครื่องจ่ายจารบีไฟฟ้าใช้ลมประเภทแรงดันระบบ PLC มีสปริง, กาจารบีไฟฟ้าใช้ลมประเภทแรงดันระบบ PLC มีสปริง

Features:
1.KGB and KGBP types are suitable for grease NLGI grades 000, 00 and 0.
2.Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities
dropping into the reservoir.
3.KGB and KGBP can be operated by Programmable Logic Controller (PLC). The pressure relief
system of KGB and KGBP is pneumatic and recommendation for air pressure range is 4.5 ~ 8 kg. It
has to work with CEB Type Volume Distributor which designs as a singular outlet with fixed discharge
volume that each lubricating point has equal amount of lubricant. There are different types of
discharge volume options such as 0.03, 0.06, 0.10, 0.16, 0.20, 0.30, 0.40, 0.50cc/ stroke upon
request. Grease will feed during the operation time of the lubricator and the amount of grease feeding
is fixed.
4.Pressure switch can be added as optional for checking if the piping works normally. The standard
setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if
the pressure doesn't reach the default setting, it sends a alarm signal. NO (Normally Open) contact is
available on the request.
5.Magnet Level Switch is also an optional accessory that can be added upon request. It sends
continuous signal automatically when the grease level is lower than the minimum level.
6.For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button
can be used as manually grease feeding for no more than 3 minutes.
7.When the motor temperature reaches 100°C, the sensor will be on to stop the motor continue running
about 5 minutes.
8.It has a pressure gauge that the operator can check the pressure easily.

Application of Machines Equipment:
1.It can be used for the machines requiring strictly rationing grease flow.
2.It usually works with rubber or plastic machines, press machines, machine centers, woodworking
machines, etc.