KGH-2L Grease Electric Lubricator, ปั๊มจารบีระบบ PLC, ปั๊มจารบีออโต้ระบบ PLC, เครื่องจ่ายจารบีระบบ PLC, เครื่องจ่ายจารบีออโต้ระบบ PLC, กาจารบีระบบ PLC, กาจ่ายจารบีออโต้ระบบ PLC, กาจารบีออโต้ระบบ PLC, ปั๊มจารบีใช้ไฟฟ้าระบบ PLC, เครื่องจ่ายจารบีใช้ไฟฟ้าระบบ PLC, ปั๊มจารบีระบบ PLC, Programmable Logic Controller

Features:
1.KGH type is designed for the machine which needs continuously fixed amount grease-feeding. The
maximum operating pressure could reach 300 kgf/cm² and discharge volume is 4.8cc per minute.
2.KGH has a stirrer that can stir grease from NLGI 000 to 2.
3.It has three outlets as optional upon the customer’s request. The standard type is one lubricant outlet
with an excess pressure valve. The excess pressure valve bore is PT 1/4 and the optional accessory
adapter could be selected from Ø4~Ø10.
4.There are two grease nipples for filling up grease by a grease gun in order to avoid impurities
dropping into the reservoir.
5.To avoid the danger of excessive pressure, the excess pressure valve will open to clear excess
grease when the operating pressure reaches 250 kgf/cm².
6.KGH can continuously supply grease-feeding and its operation and interval time can be set up by
Programmable Logic Controller (PLC).
7.Recommend working with CV type progressive feeders that can easily control the volume of lubricant.
CV type progressive feeders supply a fixed flow of lubricant that deliver equal volume to each point
and the discharge volume of each outlet is 0.18cc/stroke.
8.A timer is available for AC 110V/220V upon request.

Application of Machines Equipment:
1.It could be applied for Plastic or Rubber Processing Machines, Pressing and Special Purpose
Machines, etc.