โพสเมื่อ
รายละเอียด:
| |
H Series
• 8 sizes with power from 0.12 to 45 kW and gears with shaved or ground profile.
• Gearing with 1, 2 and 3 reduction stages.
• Reduction ratios between 1,2 and 280.
• Torque max 8000 Nm and admissible radial loads max 55000 N.
• Casing in G200 grey cast iron for high strength and optimized with FEM analysis.
• Excellent mechanical strength, particularly suitable to support high axial loads and high reliability.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.
| |
| | | | |
|
| |
HA Series
• 4 sizes with power from 0.12 to 4,8 kW.
• Gears with shaved or ground profile.
• Gearing with 1, 2 and 3 reduction stages.
• Reduction ratios between 1,3 and 350.
• Torque max 480 Nm and admissible radial loads max 8000 N.
• Cases in die-cast aluminium alloy.
• Excellent mechanical strength while being and particularly lightweight.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.
| |
| | | | |
|
| |
NMRV - PC Series
• 11 sizes with power from 0.06 to 15 kW.
• Patented case with modern design.
• Reduction ratios between 5 and 100.
• Torque max 1400 Nm and admissible radial loads max 16500 N.
• Cases up to 105 in die-cast aluminium alloy.
• Cases over 110 in G200 grey cast iron.
• Worm wheel: bronze GCu Sn12 (UNI7013-72).
• Ground worm profile ZI (UNI4760).
• Excellent mechanical strength while being especially lightweight.
• Load capacity calculated to BS721-83.
• Verified according to Niemann.
• Size 030 and over are painted with Ral 5010 blue epoxy-polyester powder.
| |
| | | | |
|
| |
B Series
• 5 sizes with power from 0.55 to 45 kW.
• Gears with shaved or ground profile.
• Gearing with 3 reduction stages.
• Gleason spiral bevel gear pairs with run-in profile.
• Reduction ratios between 7,8 and 180.
• Torque max 8000 Nm and admissible radial loads max 65000 N.
• Casing in G200 grey cast iron for high strength and optimized with FEM analysis.
• Excellent mechanical strength.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.
| |
| | | | |
|
| |
BA Series
• 3 sizes with power from 0.12 to 4,8 kW.
• Gears with shaved or ground profile.
• Gearing with 2 and 3 reduction stages.
• Gleason spiral bevel gear pairs with run-in profile.
• Reduction ratios between 7,6 and 443.
• Torque max 450 Nm and admissible radial loads max 5500 N (hollow shaft) and 10000 N. (solid shaft).
• Cases in die-cast aluminium alloy.
• Excellent mechanical strength while being and particularly lightweight.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843.
| |
| | | | |
|
| |
S Series
• 5 sizes with power from 0.12 to 22 kW.
• Gears with shaved or ground profile.
• Gearing with 2 and 3 reduction stages.
• Reduction ratios between 7,3 and 394.
• Torque max 3000 Nm and admissible radial loads max 11200 N (hollow shaft) and 30000 N. (solid shaft).
• Casing in G200 grey cast iron for high strength and optimized with FEM analysis.
• Excellent mechanical strength.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843. | |
| | | | |
| |
SH Series
• 10 sizes with power from 0.12 to 45 kW.
• Gears with shaved or ground profile.
• Gearing with 1, 2 and 3 reduction stages.
• Reduction ratios between 1,2 and 280.
• Torque max 8000 Nm and admissible radial loads max 55000 N.
• Casing in G200 grey cast iron for high strength and optimized with FEM analysis.
• Excellent mechanical strength, particularly suitable to support high axial loads and high reliability.
• Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88.
• All Size are painted with Ral 5010 blue epoxy-polyester powder according to DIN 1843. | |
| | | | |
| |
SW - PC Series
• 10 sizes with power from 0.06 to 15 kW.
• Patented case with modern design.
• Reduction ratios between 5 and 100.
• Torque max 1400 Nm and admissible radial loads max 16500 N.
• Cases up to 105 in die-cast aluminium alloy.
• Cases over 110 in G200 grey cast iron.
• Worm wheel: bronze GCu Sn12 (UNI7013-72).
• Ground worm profile ZI (UNI4760).
• Excellent mechanical strength while being especially lightweight.
• Load capacity calculated to BS721-83.
• Verified according to Niemann.
• All Size are painted with Ral 5010 blue epoxy-polyester powder. | |
| | | | |
| |
T - D - S Series
• Fan cooled ventilation.
• Cage rotor in die-cast aluminium alloy or aluminium.
• Insulation class F.
• Protection degree IP55.
• Standard height to centre and dimensions from 63 to 132.
• Standard powers from 0.09 to 11kW.
• Standard production Series T Three phase.
• Series D Double polarity three phase.
• Series S Single phase.
• Series TB Self-braking three-phase.
• Series DB Self-braking double polarity three phase.
• Series SB Self-braking single phase.
• Series HSE High starting torque single phase with centrifugal switch. | |
| | | | |