Continuous-Flow Screen

Gilson's versatile Continuous-Flow Screen is ideal for laboratories with multiple separation applications. The CF-1 is practical and efficient for small-scale scalping, mass separation and continuous-feed production applications with coarse-sized materials.  Trays are vibrated in an inclined position with angle adjustable from 4°—10°, and the vibration speed is digitally controlled speed up to 650 cycles per minute. The vertical-throw action is designed primarily for coarse materials (2in to No.4), but adjustable incline and frequency allow use with a wide range of materials and sizes. A special low amplitude drive shaft may also be specified to improve separations in sizes finer than No. 4.

The unit can be operated with either one or two screen trays, purchased separately, and the screening area is a generous 16x24in (406x610mm) in each tray. Inclined Screen Trays are available with stainless steel wire cloth in ASTM E11 sizes 4in to No. 100 (100mm to 150µm), or may be specified with round openings, slotted openings, or other special wire cloth. Discharge pans collect fines and are available as bottom-discharge or front-discharge design trays, and pans are secured by threaded clamp rods easily operated on top of the unit. The CF-1 is powered by a 1/2hp, fan cooled, totally enclosed motor. Although continuous-flow screening is not recommended for testing applications, the versatile CF-1 may be adapted for some testing work by setting at lowest incline angle and replacing Inclined Screen Trays and pan with TS-1 Testing Screens.

Features:

Adjustable for a wide variety of applications for coarse-sized materials
Clamp rods secure trays and pans
1/2hp motor powers unit
Included Items:

Continuous Flow Screen

Accessories:
* Continuous-Flow Inclined Front Discharge Pan
* Continuous-Flow Bottom Chute Discharge Pan
* Low-Amplitude Drive Shaft
Continuous-Flow Screen Trays ASTM E11 wire cloth