02-5316293 (อัตโนมัติ), 08-82275625-9
โพสเมื่อ
ชื่อสินค้า
เครื่องกวนสารให้ความร้อน SHPM-10 (Hot Plate & Magnetic Stirrer)
รายละเอียด:
เครื่องมือวิทยาศาสตร์ อุปกรณ์วิทยาศาสตร์ เครื่องกวน เครื่องกวนสารให้ความร้อน magnetic stirrer >เครื่องกวน สารให้ความร้อน SHPM-10 (Hot Plate & Magnetic Stirrer)
HOT PLATE & MAGNETIC STIRRER |
|
Special Features | |
Heat is equally distributed due to the use of the Panel Heater. SHPM-10D / SHPM-10
This product encloses both a hot plate and a magnetic stirrer in onebody so that heating and stirring can be performed simultaneously orseparately with the added features of temperature control and speedcontrol. SHPM-10D / SHPM-10
Thecase(body) painting is treated with KARUMEL powder coating so that itwithstands peeling due to external impacts and scratches.
Theceramic-coated heat plate withstands long-term exposure to acids andalkali, protecting it against peeling and distortion. |
| | |
SHPM-10D (Digital, Hot Plate & Magnetic Stirrer) | | |
- Heating Function (Hot Plate)
- Control Method : PID(Proportional Integral Differential) Type.
- Consists of a K-type sensor and an accurate temperature can beobtained by using proportinal control output(PID 4~20mA).
- Temperature Accuracy : Within±1%(based on experiment on liquid).
( The range of error can be widened according to experiment environments in case of
experimenting on solid.
Based on the user’s need, before using, the temperature should becontrolled by using a separate thermometer. )
- Heater Capacity : 550 Wattage
- Digital Display(LED).
- Stirring Function(Magnetic Stirrer)
- Control Method : Feedback type.
- Due to the use of a feedback-type speed control system, there is norpm change according to load change.
- Speed Accuracy : ±0.2%
-The high-efficiency built-in DC motor and feedback speed controllersupport a powerful motor output and flexible control from 50 to 1200rpm.
- This DC motor supports a stable speed at the start speed (low speed) and low heat emission.
- These DC motor and powerful magnet prevent breakaway of the stir bar even at high speed.
- Digital Display(LED). | |
SHPM-10 (Hot Plate & Magnetic Stirrer) | | |
- Heating Function (Hot Plate)
- The temperature canbe effectively controlled from low to high temperarures as aPVC(proportional voltage control) type controller is built in
(Based on the user’s need, before using, the temperature should becontrolled by using a separate thermometer.
What is the Proportional Voltage Control?
This is a method where constant and steadystate voltage is supplied toeach load according to different dial settings. )
- Heater Capacity : 550 Wattage
- Stirring Function.(Magnetic Stirrer)
- You canadjust the speed from 50 to 1700 rpm with the help of thehigh-efficiency DC motor and speed controller (Stepless electroniccontrol type) which are built in.
- This DC motor supports a stable speed at the start speed(low speed) and low heat emission.
- These Dc motor and powerful magnet prevent breakaway of the stirbar even at high speed. | | | | |
Technical Data | |
Model | |
SHPM-10D / 10 | |
Case Construction | |
Stainless steel and Aluminum, with chemically resistance powder coating. | |
Plate Size | |
7.08” x 7.08” (180 x 180mm) | |
Elment Temperature | |
Up to 320? Maximum(SHPM-10D,
SHPM-10, SM-10) Surface temperature of heating plate | |
Supply Voltage & Frequency | |
AC 110~120V (or 220~230V), 50/60Hz | | | | | |
| |
Product’s Type & Model Number | |
Model | |
SHPM-10D | |
SHPM-10 | |
Control Method | |
Heater : Digital P.I.D.control | |
Heater : Proportional Voltage Control | |
Motor : Feedback Control | |
Thermo Couple : “K”(CA)type | |
Motor : Stepless Electronic Control | |
Temperature/Speed Digital Display | |
Heater Capacity | |
>
550 WATTAGE | |
Motor Type | |
DC24V
RPM : 100?1,200 | |
DC24V
RPM : 100?1,700 | |
Power Supply | |
>
115V or 230V / 50/60Hz | | | |
?Specifications are subject to change for improvement in the quality of our products.
คำค้นหา:
plate magnetic stirrer เครื่องกวนสารให้ความร้อน shpm_10 hot