SIEMENS Motor SIMOTICS HT-direct (permanent magnet)

High-Torque Motors SIMOTICS HT Serie HT-direct

The SIMOTICS HT Series HT-direct high-torque motors are permanent-magnet synchronous motors that can provide high torques at low speeds directly at the driven machine. High efficiencies and good power factors can also be achieved at low speeds as a result of the permanent magnet rotors. The SIMOTICS HT Series HT-direct high-torque motors are offered as a harmonized system together with SINAMICS drive converters. The HT-direct motor / SINAMICS drive converter represents a drive solution with a long service lifetime but with low lifecycle costs and high efficiency for applications with low operating speeds.

Technical data overview
Recommended converters: SINAMICS G and S converter series.

Rated torque : 6.000 – 42.000 kNm
Rated power : 150 – 2.100 kW
Shaft height : 400 mm, 450 mm. 500 mm
Degree of protection : IP55
Rated speed : 200 – 800 min-1
Rated voltage : 400, 460, 690 V
Cooling method : IC71W (water-jacket-cooled), IC416 (rib-cooled with forced air cooled)

SIMOTICS HT benefits & applications

Benefits
With slow-running drives, the efficiency of the HT-direct series is approximately 2 to 3 % higher than for similar drive concepts, if gear or gear steps can be saved. For a 1000 kW motor, this results in a saving of 33 kW, which is an annual saving of approximately 15000 € for an operating time of 8 hours per day

High pole design in combination with permanent magnet technology ensures that the space requirement and mass of the motors are lower than for similar asynchronous machines. The slow-running motors of the HT-direct series obviate the need for a gearbox in many cases (reduction in engineering, assembly and maintenance outlay, lower investment and lower operating costs)

Efficient, optimally matched drive system, SINAMICS converter and HT-direct motor for operation with or without encoders

Thanks to their long service life (nominal bearing lifetime > 60000 hours), HT-direct high-torque motors are maintenance-free and have a high availability especially for applications in which a gearbox can be omitted

Environmentally-friendly system (where applicable, no disposal of gearbox oil is necessary; energy-saving drive system)

Customization is possible