MEDENUS GAS PRESSURE REGULATOR | R 101

The gas pressure regulator is composed of the actuator housing and the “diaphragm assembly plus actuator”functional unit. The diaphragm assembly is pre-pressure-compensated.
The gas flows through the actuator housing in the direction of the
arrow. The external measurement line port is used to pass the outlet pressure to be regulated to the bottom of the diaphragm comparator of the diaphragm assembly. It compares the actual value with the command
variable preset by the force of the se tpoint spring. The set point required in each case is set via the setting screw. Any deviation from the set point is transwithted by the valve stem to the actuator, which is adjusted such that the actual value is adjusted to the set point. In case of zero flow, the actuator will close tight, causing the closing
pressure to be established.

Technical Specification
       Inlet pressure pu max.         :   8 bar
       Outlet pressure pd              :   8 - 1.200 mbar
       PS                                   :   8 bar
       Ambient temperature           :  -20 °C to +60 °C
       Mounting position any Housing Material aluminium
       Approval according to PED
       Gas specification                  : LPG, NGV, non-aggressive gases. Other gases on request.