The µOLED-160-G1 is a 1,7" Passive Matrix OLED (PMOLED) display module (160x128 resolution, 65K true to life colors) with embedded GOLDELOX-GFX graphic processor. The module is designed to operate under two different software platforms: serial command or 4DGL (4D Graphics Language).
µOLED-160-G1 main features:
- 160x128 resolution.
- 65K true to life colours.
- PMOLED screen.
- 1.7" diagonal size.
- Display active area: 33.6x27 mm.
- Module size: 52x32x6.3 mm.
µOLED-xxx-G1 Series main features:
- No backlighting required.
- Near 180° viewing angle.
- Easy 5 pin interface to any host device: VCC, TX, RX, GND, RESET.
- Voltage supply from 3.6V to 6.0V, current @40mA nominal when using a 5.0V supply.
- Serial RS-232 (0V to 3.3V) with auto-baud feature (300 to 256K baud).
- Powered by the 4D Labs GOLDELOX-GFX processor.
- 2 different operating platforms: the Serial Command platform (factory default) or the 4DGL (4D Graphics Language) platform.
- Onboard micro-SD (µSD) memory card adaptor for storing of icons, images, animations, etc. 64Mb to 2Gig µSD (memory card not included).
- Rich set of built in graphics commands and functions.
Serial Command Platform
The serial command platform allows the display module to be used as slave device connected to an external host. The host can be any controller such as a PIC, AVR, ARM, STAMP, etc. or even a PC where all screen related functions are sent using a simple protocol via the serial interface. Serial commands may comprise of a single byte or multiple bytes of data depending on the command type. The serial platform allows users to develop their application using their favourite microcontroller and software development tools.
4DGL Platform
4DGL is a graphics oriented language allowing the developer to write applications in a high level language (syntax similar to popular languages such as BASIC, C, Pascal, etc.) and run it directly on the GOLDELOX processor embedded in the display module. The rich set of built in library functions and the high level syntax allows the user to take complete control of all available hardware resources such as the Serial Port, Graphics Display, micro-SD card, I/O pins, etc. This eliminates the need for an external host micro-controller to drive the display module via serial commands. It provides the user complete independence to quickly develop powerful applications.
ข้อมูลเพิ่มเติม www.warf.com