CLS Type Circulating Electric Lubricator, ปั๊มน้ำมันออโต้แบบหมุนเวียนน้ำมันกลับเข้าถัง, เครื่องจ่ายน้ำมันออโต้แบบหมุนเวียนน้ำมันกลับเข้าถัง, ปั๊มน้ำมันไฟฟ้าแบบหมุนเวียนน้ำมันกลับเข้าถัง, เครื่องจ่ายน้ำมันไฟฟ้าแบบหมุนเวียนน้ำมันกลับเข้าถัง

Features:
1.There are 3 types of flow rate available, CLS-10, CLS-30 and CLS-50. Please refer to the
specification chart for details.
2.CLS is a circulating type lubricator which means the oil flows out from the discharge outlet into the oil
pipes to the lubricating points then continues flowing back into the oil tank through the cyclic inlet. The
cyclic inlet has a magnetic filter which can prevent the impurities from getting into the oil tank in order
to assure the oil clean.
3.After installing and connecting the discharge outlet with piping, make sure the oil pipes are fulfilled
with oil before starting a new circulating lubrication cycle.
4.It has a high quality alloy steel pump that not only can provide steady output pressure and low noise,
but also can assure the oil reaches each lubricating point. It is suitable for applying in the large
machineries' demands.
5.It has a pressure switch that can detect the pressure of pipes in order to check if there is leaking
occurred. The standard specification is NC contact and NO contact is available on request.
6.It has a pressure-regulating valve that an operator can adjust the pressure and check the pressure
easily.
7.It has a float switch that can detect the oil level. It sends continuous signals automatically when the oil
level is lower than the minimum.
8.The standard specification is assembled with 1/2HP motor but 1HP motor is available upon request.
9.The standard specification of cyclic inlet is 1” but 3/4” is also available upon request.
10.A buzzer can be added on request. It alarms when the oil level is lower the minimum.

Application of Machines Equipment:
1.CLS type lubricator can provide efficient cooling, lubrication and filtration that can reduce wear of the
lubricating parts. It is suitable for the machines that require large discharge volume and a cooler to
reduce the oil temperature.