เครื่องวัดคุณภาพน้ำหลายตัวแปร

โพสเมื่อ 27 ก.พ. 2012, 19:32 น.

รหัสสินค้า

NANA-132157

ชื่อสินค้า

เครื่องวัดคุณภาพน้ำหลายตัวแปร

แบรนด์

JFE advantech

โมเดล

RINKO

เวลาการจัดส่ง

90Day(s)

ราคา

สอบถามผู้ขาย

ติดต่อ

หมวด: Energy and Environment/Environment Projects

รายละเอียด:

Features
Weight in water only 1.5kg AAQ Series are compact & light-weight multi-parameter water quality meters Offering a high-accurate deployment & also suitable to vertical profiling measurement

Processing units

PT Type Handy Type IF Type AAQ-PRO

>Overview

>AAQ1183 is a modernized compact and light-weight multi-parameter water quality meter, developed following the completion of COMPACT series lineup. The small sensor unit weights only 1.5kg in water and can profile water manually. Since the housing is made from robust titanium, the sensor unit is robust and corrosion resistant. The signal cable can be simple detached from the sensor unit when a cable of different length is required. The Kevlar-reinforced signal cable has a diameter of only 6.5mm and a breaking strength of 30kg. No additional cable is required for the deployment, which makes the handling of the unit easy on land as well as onboard.
Three different types of interface units are available for various measuring purposes, such as simple type, handy type, multifunction type, etc.

>Specifications

Parameter	Type	Measurement range	Resolution	Accuracy	Time constant
Depth	Semiconductor Pressure Transducer	0 to 100 m	0.002 m	0.3 %FS	0.2 sec.
Temperature	Thermistor	-5 to 40 °C	0.001 °C	±0.02 °C	0.28 sec.
Conductivity	Inductive Cell	0 to 60 mS/cm	0.001 mS/cm	±0.02 mS/cm	0.28 sec.
Conductivity (fresh water)	Inductive Cell	0 to 500 µS/cm	0.1 µS/cm	±20 µS/cm	0.2 sec.
Salinity	UNESCO formula	0 to 40	0.001	±0.03
Turbidity	Back-scattering Light	0 to 1000 FTU (Formazine)	0.03 FTU	±2 %FS or ±0.3 FTU	0.2 sec.
Chlorophyll	Fluorescent Scattering Light	0 to 400 ppb (Uranine)	0.01 ppb	±1% FS or ±0.1 ppb	0.2 sec.
DO	Galvanic Electrode	0 to 20 mg/l (0 to 200 %)	0.01 mg/l (0.01%)	±0.2 mg/l ( ±1 %)	3.5 sec.
pH	Glass Electrode	0 to 14 pH	0.01 pH	±0.2	10 sec.
Photo quantum	Photo diode	0 to 5000 µmol/s/m²	0.1 µmol/s/m²	±5 %	0.1 sec.

Models & Parameters

Models: AAQ-	1180	1182	1183	1186
Depth
Temperature
Conductivity
Conductivity(fresh water)
Salinity
Turbidity
Chlorophyll
DO
pH
Photo Quantum

Others

Communication format		RS485
A/D Conversion		16 bits digital conversion
Size		89.1 mm in dia, 276 mm in length
Weight		2.4 kg in air, 1.5 kg in water
Material		Titanium

		Measurement in the rain
Since its introduction in 2003, more than 120 units of the light-weight and multi-parameter aqua quality meter AAQ1183 series have already been sold. We received many useful comments from the initial users of the AAQ series. This valuable field test information helps us to improve this system and led to the introduction of a revolutionary new data acquisition software and onboard processing unit.

TOUGH BOOK CF-18 (18BC in English OS) One of the many great features of the AAQ series is that the instrument links to a TOUGH BOOK laptop running our powerful new data acquisition software. The TOUGH BOOK is a tablet style laptop developed specially for rough environment. The B5 version of the TOUGH BOOK is splash-proof, and can be operated on a large-sized color LCD screen with touch pen function. The battery endurance of the AAQ-TOUGH BOOK combination is good for up to 8 hours of continuous operation. The instrument can be operated by a single person by using neck and waist straps.		TOUGHBOOK on board
>
Water-proof interface unit (AAQ IF) The mobility of the AAQ-TOUGH BOOK combination is maximized through the small water-proof I/F interface unit. The interface unit supplies power to the AAQ instrument and handles the data transmission between the instrument and the TOUGH BOOK. The AAQ instrument and the I/F unit communicate using RS485 protocol, while the I/F unit and TOUGH BOOK communication is RS232 communication. Data upload and display is in real-time. The I/F unit holds 8 pcs. AA batteries, which will power the AAQ for up to 10 hours during typical operation. When performing long-term continuous deployments, an external 12VDC or 100-240VAC power supply can be used. The I/F interface unit weights only 750g including batteries. It can be carried on a waist belt, which makes it possible for the entire system to be operated by a single person.
>
Software The AAQ1183-PROFESSIONAL is the newly developed data acquisition and processing software. The user-friendly software has a clearly visible display showing the measured data in real time on the TOUGH BOOK screen, even during severe marine conditions. The basic display selections, such as profiling or time-series observation, real-time data display, and automatic plotting, are shown in big characters and various colors. Furthermore, the replay of stored data, as well as the setup of time and sampling rate, etc. is easily activated using touch-pen action.

Overview
This is a display unit suitable for real in-situ deployment at sea. It is operated using a touch-panel color LCD and external push buttons. The multi-functions comprise vertical distribution graphs, data printing and storing of data into built-in flash memory. A GPS receiver records position data.

Overview
This unit can store in built-in memory and display the data. This model is operated with a simple touch-key pad.

Overview
This unit transforms the RS-485 signal from the sensor unit into RS232-C for ommunicating with a PC to transfer data for real time monitoring.

Function Comparison

	PT-10 (AAQ1183-PT)	Pro Unit (AAQ1183-Pro)	Smart handy (AAQ1183-H)	Interface (AAQ1183-IF)
Screen	5.7 inch TFT Color LCD	Rotatory 10.4" TFT Color LCD	4 Lines 20 characters LCD	N.A.
Operational function	Touch Panel Screen External Push button	Touch Screen Touch Screen Pen	Push button	N.A.
Indication	Measured Data, Vertical Graph	Measured Data, Vertical / Time series Graph	Measured Data	N.A.
Type of memory	64 Mbyte Compact Flash Memory (detachable)	PC built-in hard disk	Built-in 2Mbyte Flash Memory	N.A.
Measuring method	1. Auto-vertical measurement by depth pitch selected (Selectable from 0.1 ,0.2, 0.5, 1 m in depth pitch) 2. Spot recording of measured data at random depth	Continuous measurement per selectable Interval (0.5 / 1.5 sec.)	Consecutive measurement by selected interval (0.25, 0.5, 1, 2, 5 sec.)	Data output : RS232-C Consecutive measurement by selected interval Programmed by PC application software
Printing function	1. Auto-printing of measured data at site upon finishing auto-Vertical measurement 2. Printing of measured data at site after spot measurement	N.A. (To be printed out through external Printer)	N.A. (To be printed out through external Printer)	N.A. (To be printed out by printer connected to PC)
Calender information	Built-in calender (Auto-correction by GPS)	PC built-in timer	Built-in calender	N.A.
Power	AC110 / 220 V & external DC12 V	PC : Built-in battery (Useable for 8 hours) Interface : DC12 V or Alkaline battery UM-3 8pcs.	AC110/220V or DC12 V Alkaline battery UM-3 8pcs.	AC110/220V or DC12 V Alkaline battery UM-3 8pcs.
Dimensions	285 x 350 x 230 mm	<PC> 271x 216x 49 mm <Interface> 199 x 83 x 45.6 mm	85 x 115 x 255 mm	78 x 90 x 190 mm
Weight	3 kg	<PC> 2 kg / Interface: 500 g	1 kg (excluding batteries)	1 kg
Other function	GPS function (standard)	Quadratic Data Processing Program