เครื่องวัดอัตราการไหล
Flow meter
Integral Electromagnetic flowmeter / Integral-Electromagnetic-flowmeter
Product features:
• There are no moving parts in pipeline to impede the flow stream so there is almost no pressure loss in measurement.
• Measurement result will not be affected by physical parameters such as flow velocity distribution, fluid pressure, temperature, density, viscosity.
• Measurement range can be modified on the working spot according to customer's actual requirement.
• High definition backlight LCD display .Pure English menu .Operation is simple and it is easy to understand and use the instrument.
• Adopting of SMD device and SMT technology assures high circuit reliability.
• There are three totalizers displaying positive flow, reverse flow and net flow and there is an inner recorder for at most 16 times power failure time.
• RS485, RS232, HART and Modbus communication output.
Technical Parameters
Nominal Bore:
Electrode Material:
Accuracy:
Lining material:
Electrode Forms:
Conductivity:
Flow rate scope:
Medium Temperature:
Rated Pressure:
Flange Standard:
Flange Material:
Housing Material:
Output Signal:
Cable Interface:
Protection Grade:
Explosion proof Grade:
Installation Type
Power Supply Voltage:
Power Consumption: | |
DN6-DN2000
Mo2Ti,Hc,Hb,Ta,Pt
±0.5%,±1.0%(based on pipe size)
Teflon ? Neoprene ?Polyurethane?acid-proof rubber
Fixed form
Not less than 5?s/cm
0.2 ~ 11m /s selectable
25 ? ~ 180 ?
0.25Mpa-32Mpa
GB9115-88 ( DIN2051 , BS4504 )
Carbon steel, stainless steel
Carbon steel ,stainless steel
4-20mA current ? 0-1kHz frequency ? RS485
PG10
Sensor : IP65 ? IP67 ? IP68
Exmdib IIBT4
Integrated type / Remote type
185VAC-265VAC , 18VDC-36VDC
?15W | |