J Series, Self-priming centrifugal pumps Ideal for pumping liquids with solids in suspension. They are for applications where the main feature is the difficulty in priming and are used in the industry, construction and emergency.
APPLICATIONS
INDUSTRY
-Transfer: clean, dirty, containing sand in suspension, muddy, neutral, alkaline, acidic liquids; low viscous petroleum products, solvents even if dirty; milk of lime, caustic soda; washing, cooling, recirculation, smoke scrubbing
-Treatment: pumping polluted, hot or corrosive waste water containing sand, mud or solids in suspension; dosing neutralizing liquids; pumping out settled sludge
-Naval: loading and unloading; bilge pumping; washing, fire-fighting, stripping, sanitary duty and circulation
-Agriculture: surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilizers; distribution of liquid animal feed; transfer of must; washing.
BENEFITS
-Rapid self-priming without foot valve. Once filled with water, the pump is automatically primed to a height of 7,5 m
-Semi-open impeller allowing the passage of wide solid bodies and easy inspection.
-High resistance to abrasive liquids: the wear plate is easily replaceable.
-Axial mechanical seal lubricated from the outside: no leaks or infiltration of air along the shaft.
-Easy to install: only the suction pipe needs to be immersed in the liquid. The pump can be located above and in a dry place, in the most suitable location for service and control.
-Long life: the parts subject to wear can be easily replaced, several times, restoring the original performance of the pump.
--------------------------------------------
CONTACT (ติดต่อ) ;
Tel.1 : 081-694-7939
Tel.2 : 085-331-7229
Line ID1 : 641k1
Line ID2 : blackrosekk
Email1 :
[email protected]
Email2 :
[email protected]
--------------------------------------------