Self-priming diaphragm pumps
Ideal for pumping thick, muddy, abrasive liquids with solids in suspension.
They are used in construction and industry.
How the LB diaphragm pump works
The system consists of a diaphragm guided by a coupling rod. The flow generated by the movement of the diaphragm is controlled by check valves at the suction and delivery.
As the diaphragm rises away from the bottom of the casing it produces a vacuum which draws the liquid into the casing through the suction valve. When the diaphragm is on the downstroke, the liquid is expelled through the delivery valve.
Benefits
-Rapid dry self-priming down to 6 m in a few seconds
-Can run dry indefinitely
-High abrasion resistance
-Large size solids handling
-Capacity is proportional to speed
-Simple construction: the parts subject to wear or aging, such as diaphragms and valves, are easily replaceable
Features
-Parts in contact with liquid in aluminium, cast iron or AISI 316 stainless steel
-Neoprene diaphragm and valves
-Air cushion chamber to reduce pulsations in the suction line
-Spring coupling rod to protect against damage due to solids
-Solids handling up to 2.4" (60 mm)
-Liquid viscosity up to 1,000 cSt
Product range
-LB 60,50 mm., 2"
-LB 65, 50 mm., 2"
-LB 80, 80 mm., 3"
-LB 80 V, 80 mm., 3"
-LB 80 V2, 80 mm., 3"
-LB 100, 100 mm., 4"
-LB 1-4", 100 mm., 4"
-LB 2-6", 150 mm., 6"
--------------------------------------------
CONTACT (ติดต่อ) ;
Tel.1 : 081-694-7939
Tel.2 : 085-331-7229
Line ID1 : 641k1
Line ID2 : blackrosekk
Email1 :
[email protected]
Email2 :
[email protected]
--------------------------------------------