-
Ideal for low volume application up to 1 sample per hour with one vessel. Maximum 8 samples per day
-
No water required
-
Inexpensive
-
No operator attention required during analysis, the LCD display prompts the operator and displays faults and progress
-
Uses the proven CAL2k-4 Intelligent vessel
-
Small and compact
-
Uses a standard PC keyboard (PS2)
-
Result retrieval connected to a PC, using the supplied Windows Operating Software
-
Stores 1024 results and other variables
-
Sample identification is settable and self-incrementing
-
Vessel temperature can "stream" to a PC for user spreadsheet analysis
-
Factory setup for standard operation, however some values can be changed via the keyboard
-
Can use "spiking" for hard to combust samples
-
Can connect directly to balance for mass entry, or the mass can be entered via the keyboard
-
Built in diagnostic, which is ideal for first hand diagnostic
-
Vessels are pre-programmed for 5000 determination cycles before inspection
-
External power supply for 9 Volts, 100mA is supplied
-
Works in BTU/lb, Calories/grams or MJ/Kg
Complete ECO System
Complete system consists of the following:
ECO Calorimeter
ECO-KT Calorimeter Installation Kit
CAL2k-3 Filling Station
CAL2k-3-KT Filling Station Kit
CAL2k-4 Vessel
CAL2k-4-KT Vessel Installation Kit
Optional Extras (Recommended or Required):
REGULATOR High Pressure Oxygen Regulator (Required and MUST be supplied before installation)
It is important tonote that a High Pressure Oxygen Regulator capable of filling the vessel to3Mpa (3000Kpa, 30 bar, 30 atm) is required and must be available/supplied prior to installation of the unit.
Items to Source Locally
Balance (Recommended Satorius Balance CP64 or equivalent)
PC with Windows 98/2000/XP/NT4.0 Installed (Required only if running software - a PC is not required to operate the unit)