P
This Bakker Magnetics type of de-ironing system is provided
with a powerful permanent magnet
Standard overbelt magnet systems (up to the 320 series), are
driven by a drum motor.
Models from the 400 and 500 series are standard equipped
with drive through a slip-on gear motor. On request the
overbelts from the 220 series can be supplied with a motor
reductor (add "/21" to the Art. N°). The systems are
provided with a tensioning device. As the drums are curved,
the running of the belt is self-guided. The belt is made of
synthetic rubber with vulcanised idlers. The electrical
connection meets the IP 54 standards, or IP 65 if required,
standard equipped for 3 x 380 V 50 Hz. Systems with
deviating power connection can be supplied as well. Models
with an extended construction are available. Here the
extension of the main magnet pole is provided with a
transport pole, producing a field fluctuation. This field
fluctuation rotate the iron particles on the belt through which
eventual material particles, clamped by the iron pollution, get
the opportunity to return into the flow of materials. In this
way a pure iron fraction is left. Models with an extended
construction can be installed solely in the longitudinal
direction of the conveyor belt. At the 400 and 500 series the
rubber conveyor belt between the idlers is provided with an
extra wear-resistant layer (Correx blue 45° shore).