FULL-TIME CONTINUOUS MONITOR WITH 09070 WRIST STRAP KIT - Desco

Leading companies use continuous monitors as a cost effective component in satisfying the paragraph 6.1.3 Compliance Verification Plan requirements of ANSI/ESD S20.20. The EMIT Full Time Continuous Monitor provides 100% monitoring of both the operator and the work surface. This unit provides continuous monitoring of:
• One user wearing a wrist strap
• ESD worksurface
• Ground (50543 only)

Specification
Test range of monitored circuit: 500K - 10M ohms?
Worksurface limit*: Set to 10 megohms
Power Source: 50543: 120 VAC
                    50544: 220 VAC
                    50-60 Hz
Current Drain: <15 mA RMS
Wrist strap open circuit voltage: 1.2 volts peak to peak @
                                             1-2 MicroAmps
Mat test open circuit voltage: 5 to 7.5 volts
Response time to alarm: <50 mS
Standby “parking” snap delay: 6-8 seconds
Long Term Drift: 1/2% per decade (1st decade is 1 hr)
Temperature: 10-40 degrees C
Field Adjustment: None required
Size: .75" x 3.25" x 4.38" (1.9cm x 8.3cm x 11.1cm)