SMOOTHFLO END SUCTION CENTRIFUGAL PUMPS

CONFORM TO DIN 24255
END SUCTION TOP DISCHARGE
BACK PULL OUT CENTRIFUGAL
DISCHARGE From 32 mm To 150 mm

SPECIFICATION
Max Flow                               150 1/s
Max Head                             150 m
Max Working Pressure     16 bar on most models
Temperature Range          -10 ?C to 105 ?C
Direction of Rotation          Clock wise Viewed from drive end

APPLIICATIONS
Boostering service                    Irrigation
Water circulation                        Liquid transfer
General purpose pumping     Spraying Systems
 
Boostering service                    Irrigation
Water circulation                        Liquid transfer
General purpose pumping     Spraying Systems

CASING
The volute casing has integrally cast feet, axial suction and robust vertical top centre-line discharge. Inlet hsa cast vane to improve flow into impeller eye.

STUFFING BOX
The standard stuffing box arrangement includes with lantern ring incorporating internal flushing, The stuffing box can be connected for external liquid flush.

BEARING HOUSING
Only three sizes of bearing housings are required for the whole pump range which gives high interchangeability of parts across the entire range.

BEARINGS
Heavy duty bearings are fitted, which can be lubricated with grease or oil engine.

SHAFT
The stainless steel shafts are scaled at the impeller by means of dome type locking nut.

IMPELLER
Impellers are of enclosed design. Statically balanced and renewable wear rings reduce losses affecting performance and pump life.

SHAFT SLEEVE
Replaceable stainless steel shaft sleeve is of substantial benefit when pump requires maintenance. Any damage under gland packing can be promptly replaced
.
WEAR RINGS
Replaceable wear rings are fitted to all casings and also to back plates on large sizes which give the savings of maintenance cost and time.

SEALING
Fitted with removable sleeve, lantern ring and square plaited packing. Mechanical seal is provided as an option with carbon / ceramic faces and buna elastomers as standard.

SUPPORT FOOT
A removable support foot is fitted at the drive end for greater rigidity and ease of maintenance.