AX50 Carbon Dioxide detector Configuration - CO2 alarms set at 0.5% and 1.5%,
supplied with a quick connect wiring
Ax50 TM unit is designed to detect the presence of Carbon Dioxide in ambient air for the protection of people in confined spaces. The Ax50 TM provides audible and visual indication of potentially dangerous levels of Carbon Dioxide in the air surrounding the instrument. The instrument uses an Infra Red detector system, together with state of the art technology. It is housed in an IP65 splash proof enclosure, and is designed to provide long, trouble free service, with minimum maintenance. The Remote Alarm Repeater mimics the status indicators on the main Ax 50TM. It also provides a push-button which operates in the same manner as the Mode switch on the Ax 50TM.
If you have more than one entrance to your cellar or store room you may need more than one Remote Alarm Repeater. Up to three repeaters can be daisy chained (one repeater linked to another) covering up to three entrance doors.
How the Analox 50? works
The Analox 50? is fitted with audio visual alarms. When excess levels of Carbon Dioxide are detected an alarm is triggered. You should then ventilate the room and wait outside until the Analox 50? returns to safe mode (green light flashing only).
At dangerous levels a second alarm warns of the need to immediately evacuate the room, until the monitor returns to safe mode. By installing an Analox 50? you know your employees, non-employees (such as suppliers) and yourself are protected.
Benefits of the Analox 50?
- The Analox 50? ensures it’s safe for your employees, non employees (such as suppliers) and yourself to enter or work inside a room where Carbon Dioxide is stored.
- The Analox 50? ensures you comply with current legislation, protecting you from possible prosecution under health and safety legislation.
- The Analox 50? ensures good safety management – you know immediately when you have a gas problem.
Technical Specifications
| |
|
|
| |
|
|
Ranges | |
0.1 – 5% |
Operating Temp | |
-5 to 45OC |
Repeatability | |
2% of full scale |
Power | |
110/240 VAC or 9- 24VDC |
Technique | |
Infra red absorption |
Dimensions | |
175 x 110 x 75 (mm) |
Response Time | |
<45 seconds T90 |
Protection | |
IP66 /NEMA 4X. CE marked |
Dual Alarms Visual | |
Alarm 1 and 2 visual red |
and Audio | |
Fault Visual Amber |
Optional items fitted to, or supplied with the unit may include the following