Static Eliminator

The Standard Air-Blade? Ionizer combines the superior designed Standard Air-Blade? Air Knife with a quality static bar made by Haug, a world leading static control manufacturer. Charges can be eliminated quickly, even over large distances and surface area.

The Standard Air-Blade? air knife is an efficient and sturdy unit for many blow-off applications. For even greater efficiency and reduced noise levels you can utilize the Silent X-stream? Air Blade?. Both units utilize the quality Haug static bars - the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds

The Standard Air-Blade? Ionizer uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.

Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For washdown applications (such as pharmaceutical areas), even a washable model is available at extra cost.

All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).

Dust Removal For Car Bodies is an ideal application for the Ion Air Gun if manual cleaning is used and for the Air Blade Ionizers prior to the vehicle entering a paint booth.

• Connections on the back or ends
• It flows from end to end (full flow).
• Stainless steel models are available for high temperature and corrosive models.
• Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage.
• Patented connectors with the ground intrinsic to the cable design.
• Instant ON/OFF with no moving parts.
• Repairable Power Supply with a two year warranty.

• Flexible mounting options.
• Units can be mounted end to end for longer lengths with no air gap.
• High temperature, extra strength, and even a unique washable stainless steel model is available for special applications or as required.
• Ease of cleaning and maintenance.
• No separate ground connection that can be cut and cause sparks or accidentally shock personnel.
• Conserves air use when not required.
• Eliminates one costly area which is power supply replacement. 2 year warranty assure quality product.
• 
  
  
• How They Work

  Standard Air-Blade? Ionizer - Compressed air enters at the rear (or end) ports at (A) of the Standard Air Blade (B). (SeeStandard Air Blade? for a description of its operation). Entrained air follows the coanda profile of the air knife and along the front face flowing over the ionizing (static) bar (C) creating a fine sheet of ionized air along the entire length of the Air Blade? ionizer at it leaves the air knife at point (D). The amplified air stream maximizes velocity and force and provides a well-defined sheet of ionized laminar flow for reduced energy use in the blow off of statically charged surfaces and to remove static at long distances from the assembly. For highly charged surfaces a stronger static bar is available (Triple X Air Blade ionizers).