Air/Water Seperator

Newly developed Liquid Super Separator is a new concept of a pneumatic mist remover without filter element. The Element Free Pneumatic Water Separator uses a special centrifugal technique with radial multi-nozzles that is world patent pending and makes it possible to reject liquid mist (water and oil) to 99.9%! This pneumatic mist separator is virtually maintenance free, as there is no need to replace any filter element. A standard traditional filter with an element and automatic drain may be placed downstream to control micron size but the high liquid and mist removal of the separator will keep it clean and it may not require element replacement for an extended period of time. Maintains extremely low pressure drop.

• No filter element
• Minimal pressure drop
• Maintenance free
• Complete mist rejection
• Mist rejection rate : 99.99%
• Oil mist rejection rate : 99.99%
• Semi-permanent durability
• Power free
• Complete with Auto-drain
• No performance change over time
• Trouble free with simple construction
• Large capacity but compact
• Low cost
• 5 year warranty (except for auto drain)

Very large water separators sometimes used upstream to remove liquid but it does not prevent downstream condensation due to the temperature difference between the inside and outside of the compressed air line.

The X-Stream? Super Liquid Separator is installed at the end of a compressed air main line before a branch line, or just before the outlet of air use for the complete rejection of the mist due to the condensation inside the pipe and also remove any oil mist to 99.9%. This makes it possible to get an essentially maintenance free operation in the control of water and moisture in air line. The only possible part change would be the replacement of the auto drain valve giving the unit a semi permanent life time.

Compressed Air enters at point “A” (air in) and first is made to rotate within an outer chamber at high speed removing moisture, small particulate and oil. The removed material is drained into the bottom bowl via holes “B” at the bottom of the outer chamber to collect and be removed from the system utilizing the automatic drain “C”. The compressed air in the outer chamber is then directed into an inner chamber “D” for a second rotation and a lower speed preventing any back suction of particulate, oil or moisture. The 99.9% dry, clean compressed air is then directed out and back into the system at point “E”. This patent pending two stage rotation allows for the high level of clean, dry air with only one unit.