Tool Cooler

Frigid-X? Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.

Produces cold air at approximately 50º F (28º C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.

Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.

• No Moving Parts
• Quiet
• Driven By Air, NOT Electricity
• Small And Lightweight, Portable
• Milling, Drilling, Routing And Surface Grinding
• Low In Cost
• Superior Design And Performance
• Maintenance Free Operation
• Made Of Durable Stainless Steel And Metal Arts - NO Cheap Plastic Parts
• improves Production Rates And Finished Part Remains Dry
• Prevents Burning
• Improves Tolerance Control
• Eliminates Coolant Costs
• System Uses Strong Magnetic Base

Always use clean, dry compressed air. A manual filter is supplied with every system to insure dry air. If oil is a major problem in the compressed air line, an oil removal filter is also recommended. The temperature of the air can be controlled by reducing the pressure using either a regulator or manual shut-off valve. A solenoid valve may also be connected into the machine operation to turn the air supply to the cooling unit on-off as it is needed, thereby conserving compressed air usage.

Dry compressed air is easy to achieve utilizing a water removal filter with automatic drain and in the case of oil in the air lines, an oil removal filter with automatic drain. We recommend a 5 micron filter for water removal and a 0.03 micron filter for oil removal. These dry air filters will achieve the air quality required for any Nex Flow blowoff and cooling products.