4.056 WINKEL Bearing axial bearing fixed

WINKEL Bearings
With our WINKEL Bearings vertical and horizontal movements on machines and lifting devices can be solved economically.

Advantage of the WINKEL Bearing system:
- Reduces your designing and production costs
- Can take up high radial and axial loads
- Strong profiles for high stat. and dynamic loads
- Best dispersion of forces in the profiles
- Longer lifetime for bearings and profiles
- Economical assembling by welding bolt
- Bearing components are easily exchangeable

Working up
- For welding operations on WINKEL Bearings with a diameter less than 100 mm, all bearing components must be disassembled.
- WINKEL Bearings with an outer diameter more than 130 mm should be welded on both sides of the bolt.
- After the assembling of the bearings, or after the adjusting operation, the front side screws should be secured with loctite.
- To avoid cracks in the welded joints please use welding electrodes and cored wire for unalloyed steel. For example electrode: E 42 5 B 42 H 10 according DIN EN 499. For example cored wire: T 42 4 B C 3 H5 / 7 42 4 B M 3 H5 according DIN EN 758.
- The guide ways in the profiles should be lightly greased and not painted.

Special designs
- Special bolts are available for WINKEL Bearings of type (PR) 4.072 (P) to (PR) 4.080 (P).

System solutions
- We construct and manufacture complete lift- and handling units according to customer needs. Constructions with CAD and a progressive production enables high flexibility in achieving complete solutions in the field of handling systems and automation.