DUAL INDEPENDENT FOOTWEAR AND WRIST STRAP TESTER WITH FOOTPLATE - 50413

The EMIT Dual Independent Footwear and Wrist Strap Tester is designed to test personnel grounding devices, wrist strap and ESD footwear, to satisfy the requirements of the ESD Association.

Specification
·  Operating Voltage: 12 VDC
·  Test Switch Voltage: 5 VDC @ open circuit
·  Wrist Strap and Footwear Test Voltage: 12 VDC @ open circuit
·  Test Current: Limited by resistors and varies on the test range setting (100 kilohms - 1 gigohm)
·  Relay Contact Rating: 1 A @ 30 VDC max
·  Temperature Range: 41°F - 104°F (5°C - 40°C)
·  Operating Conditions: Indoor use only at altitudes less than 6500 ft. (2 km)
                                      Maximum relative humidity of 80% up to 88°F (31°C)
                                      decreasing linearly to 50% @ 104°F (40°C)
                                      Maximum relative humidity of 50% at 1 Gigohm setting
·  Pollution Degree: 2 per IEC 644

Features
·  Wrist strap and ESD footwear system testing
·  Three tests at the same time; depress contact once to test footwear and wrist strap independently
·  Split foot plate design
·  Independent alarming conditons
·  Relay for door locking systems
·  Can test both single and dual-wire wrist straps
·  Calibrate with the 50424 Limit Comparator
·  Made in the United States of America