โพสเมื่อ
ชื่อสินค้า
Coated Belt Timing
รายละเอียด:
SPECIAL EXECUTION FEASIBILITY
Megadyne can make special extrusion on customer request to improve belt properties and to suit better to special
applications.
SPECIAL POLYURETHANE
On customer request and with minimum quantity, Megalinear belt can be produced with different hardness:
• 85 ShA food quality polyurethane for contact with food and medical products
• 92 ShA higher resistance to temperature
• 92 ShA silicon free for painting system based on water
• 95 ShA glass reinforced
• 98 ShA extra hard polyurethane
COLOUR
On customer request and with a minimum quantity is possible to produce megalinear with several colours.
Different colour doesn’t influence belt technical properties so mechanical features are same as standard white belt.
Available colours are: • White • Black • Blue • Yellow • Transparent
SPECIAL EXTRUSION
On customer request, Megadyne R&D department can develop special extruded belts by designing special mould.
It is also possible to extrude standard belt with special cords position, ready for successive reworkings.
MECHANICAL REWORK
Megadyne have been producing specialized belting for many years. Our in-house facilities enable us to produce belt
with special holes for vacuum conveyors, belts with special backings / ground finishes for high tolerance applications.
We can remove individual teeth and perforate the timing belt as required.
BACK GRINDING
A belt back can be ground to achieve a precise belt thickness as an adjunct to precision drives. When belt back grinding
to a tolerance is required, the total thickness, including the tooth, must be specified. A grinding tolerance of +/–
0.2 mm is achievable with a level finish (i.e. thickness will not vary greatly around the belt). Most widths and lengths
are available.
LONGITUDINAL REWORK
Longitudinal rework along the belt back is possible on covered and uncovered belts. The profile can be machined
precisely for required function. The measurement is given as the depth on the belt back. Most widths and lenghts
are available.
REWORK ON BELT TEETH
The rework of the tooth profile can be very useful, i.e. improving the steering effect with guide rails. The rework
dimension is given from the top of the tooth. Most belt widths and lengths are available.
HOLES IN TIMING BELTS
Holes in timing belts can be for vacuum or air film conveying or as clearance for assembly mechanisms. Stops and
cams can be attached through the holes. Customized tooling may be required depending on the layout and dimensions
of holes required.
SINGLE TOOTH REMOVAL
Single and multiple tooth removal is available to your requirement, for applications in handling and conveying technology.