SIAM POLLUTEK CO.,LTD.
บริษัท สยามพอลลูเทค จำกัด
โพสเมื่อ
DioSense - Chlorine Dioxide Analyzer, Chlorine Dioxide Monitor, Chlorine Dioxide Meter, Chlorine Dioxide Controller,chlorine dioxide analyzer,Chlorine Dioxide Monitor,Chlorine Dioxide,คลอรีนไดออกไซด์,DioSense,Analyzer,chlorine dioxide senser,Chlorine Dioxide Meter,เครื่องวัดคลอรีนไดออกไซด์,Pi,Instruments and Controls/Meters
รหัสสินค้า
NANA-183764
ชื่อสินค้า
DioSense - Chlorine Dioxide Analyzer, Chlorine Dioxide Monitor, Chlorine Dioxide Meter, Chlorine Dioxide Controller
แบรนด์
Pi
โมเดล
DioSense
รายละเอียด:

    Online, continuousChlorine Dioxide Analyzers, Chlorine Dioxide Monitors, Chlorine Dioxide Meter and Chlorine Dioxide Controllers make up the DioSense range which utilizes the very latest and best chlorine dioxide sensor available in the world today. It is a membraned device which is insensitive to chlorine, uses no reagents, is extremely stable, and has reduced maintenance and reduced whole life costs.

    The DioSense chlorine dioxide sensors which give a dissolved chlorine dioxide measurement in ppm or mg/l and flow cells are available with different chlorine dioxide controllers giving you the same great performance with different communication, display, and control options. With the DioSense range of residual chlorine dioxide analyzers, you get everything that you need – and nothing that you don’t.

    According to the EU Directive 98/83/EC, the operators of waterworks must ensure that the levels of harmful chlorite (ClO) in drinking water remain below the specified limit of 0.2 mg/l. The monitoring of Chlorite at the same time as Chlorine Dioxide is also a European requirement.


Key Benefits

   -    Amperometric sensors – continuous online chlorine dioxide ppm measurement
   -    No chemical reagents – lower cost of ownership
   -    Stable and reliable – excellent process control
   -    Suitable for all potable and process water
   -    Up to 6 months between maintenance
   -    No interference from residual chlorine
   -    Tolerant of water containing detergent


Specification
Chlorine Dioxide Sensor Probe

    Application   :   All kinds of water treatment (e.g. bottle washing machine, CIP-plants)

    Type   :   Membrane covered, amperometric 2-electrode system

    Measurand   :   Chlorine Dioxide

    Sensor ranges   :   0-0.50 mg/l? 0-2 mg/l? 0-5 mg/l? 0-10 mg/l? 0-20 mg/l

    Working Temperature   :   >3 up to 50oC

    Max. allowed Working Pressure   :   1,0 bar, no pressure impulses and/or vibrations

    Flow Rate   :   Approx. 0.5 l/min (min 0.2 l/min)

    pH Range   :   pH1 to pH11

    Calibration   :   Manual using a suitable ClO2 test kit . Every 1 week to 3 months, application dependent

    Interferences   :   Cl2  :  does not interfere
                            O3   :  is measured with a sensitivity 25 times higher than ClO2 1% sulfuric acid or 1% nitric acid in the water have no influence to the measuring behavior

    Maintenance   :                                                

           Change of membrane cap   :   Yearly (depending on the water quality)

           Electrolyte   :   Every 3-6 months
คำค้นหา:
dioxide chlorine analyzer senser meter เครื่องวัดคลอรีนไดออกไซด์ monitor คลอรีนไดออกไซด์ diosense

บริษัท สยามพอลลูเทค จำกัด

SIAM POLLUTEK CO.,LTD.

40/25 Sukumvit 101/1 ต.Bangna อ.Bangna จ.กรุงเทพมหานคร 10260

027478234-37

Contact: ธรรมนูญ อมรรัชยา