PVN Engineering Co.,Ltd.
บริษัท พีวีเอ็น เอ็นจิเนียริ่ง จำกัด
โพสเมื่อ
Differential Pressure Gage Series 2-5000,Differential Pressure Gage,Series 2-5000,Dwyer,Instruments and Controls/Gauges
รหัสสินค้า
NANA-174531
ชื่อสินค้า
Differential Pressure Gage Series 2-5000
แบรนด์
Dwyer
โค๊ดสินค้า
2-5000
โมเดล
2-5000
ผลิตที่
สหรัฐอเมริกา
ขนาด
2-1/6"
น้ำหนัก
170.1 g
การขนส่ง
ตามตกลง
รายละเอียด:

    Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic® II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic® II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic® II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost.

    With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic® II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic® II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic® II gage is suitable for many of the same applications as the Magnehelic® gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic® gage are not required

    ModelDescription
    2-5000-0 Differential pressure gage, range 0-0.5" w.c.
    2-5001 Differential pressure gage, range 0-1.0" w.c.
    2-5002 Differential pressure gage, range 0-2.0" w.c.
    2-5003 Differential pressure gage, range 0-3.0" w.c.
    2-5005 Differential pressure gage, range 0-5.0" w.c.
    2-5010 Differential pressure gage, range 0-10" w.c.
    2-5020 Differential pressure gage, range 0-20" w.c.
    2-5040 Differential pressure gage, range 0-40" w.c.
    2-5060 Differential pressure gage, range 0-60" w.c.
    2-5100 Differential pressure gage, range 0-100" w.c.
    Specifications
    Service:
    Air and compatible gases.
    Housing:
    Glass filled nylon; acrylic lens.
    Wetted Materials:
    Consult factory.
    Accuracy:
    ±5% of FS at 70°F (21.1°C).
    Pressure Limits:
    30 psig (2.067 bar) continuous to either pressure connection.
    Temperature Limits:
    20 to 120°F (-6.67 to 48.9°C).
    Mounting Orientation:
    Diaphragm in vertical position. Consult factory for other position orientations.
    Process Connections:
    Barbed, for 3/16" ID tubing (standard); 1/8" male NPT (optional).
    Weight:
    6 oz (170.1g).
    Agency Approvals:
    RoHS.
    CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES.



คำค้นหา:
series 2_5000 gage differential pressure

บริษัท พีวีเอ็น เอ็นจิเนียริ่ง จำกัด

PVN Engineering Co.,Ltd.

1532/22-25 ซอยธนูทัย ถนน กรุงเทพ-นนทบุรี ต.บางซื่อ อ.บางซื่อ จ.กรุงเทพมหานคร 10800

0-2911-4761-5
0-2911-4760

Contact: Pavinee Hassavayukul