Differential Pressure Gage Series 4000

โพสเมื่อ 25 พ.ค. 2015, 13:54 น.

รหัสสินค้า

NANA-174526

ชื่อสินค้า

Differential Pressure Gage Series 4000

แบรนด์

Dwyer

โค๊ดสินค้า

4000

โมเดล

Series 4000

ผลิตที่

สหรัฐอเมริกา

ขนาด

4" or 101.6 mm.

สั่งซื้อขั้นต่ำ

การขนส่ง

ตามตกลง

ติดต่อ

หมวด: Instruments and Controls/Gauges

รายละเอียด:

The Capsuhelic® gage is designed to give fast, accurate indication of differential pressures. The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure.

Using the basic design of Dwyer's time-proven Magnehelic® gage, the Capsuhelic® gage contains a simple, frictionless movement that permits full scale readings as low as 0.5 in w.c. The pressure being measured is held within a capsule which is an integral part of the gage. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c.

The diaphragm-actuated Capsuhelic® gage requires no filling liquid which might limit its outdoor applications. Zero and range adjustments are made from outside the gage, and there is no need to disassemble the gage in normal service.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Model		Description
4000-0		Differential pressure gage, range 0-0.5" w.c., for vertical scale position only.
4001		Differential pressure gage, range 0-1.0" w.c., for vertical scale position only.
4002		Differential pressure gage, range 0-2.0" w.c., for vertical scale position only.
4003		Differential pressure gage, range 0-3.0" w.c., for vertical scale position only.
4004		Differential pressure gage, range 0-4.0" w.c., for vertical scale position only.
4005		Differential pressure gage, range 0-5.0" w.c., for vertical scale position only.
4006		Differential pressure gage, range 0-6.0" w.c.
4008		Differential pressure gage, range 0-8.0" w.c.
4010		Differential pressure gage, range 0-10" w.c.
4015		Differential pressure gage, range 0-15" w.c.
4020		Differential pressure gage, range 0-20" w.c.
4025		Differential pressure gage, range 0-25" w.c.
4030		Differential pressure gage, range 0-30" w.c.
4040		Differential pressure gage, range 0-40" w.c.
4050		Differential pressure gage, range 0-50" w.c.
4060		Differential pressure gage, range 0-60" w.c.
4080		Differential pressure gage, range 0-80" w.c.
4100		Differential pressure gage, range 0-100" w.c.
4150		Differential pressure gage, range 0-150" w.c.
4200		Differential pressure gage, range 0-200" w.c.
4300		Differential pressure gage, range 0-300" w.c.
4400		Differential pressure gage, range 0-400" w.c.
4500		Differential pressure gage, range 0-500" w.c.

Specifications

Service:
: Aluminum Case: Air and compatible gases and oil based liquids. Brass Case: Air and compatible gases and water based liquids.
Wetted Materials:
: Consult factory.
Housing:
: Die cast aluminum with impregnated hard coating, standard. Optional forged brass housing is required for water or water based fluids.Special material diaphragms available, contact factory.
Accuracy:
: ±3% of FS at 70°F (21.1°C). (±2% on 4000S models, ±4% on 4200, 4210, 4215, 4220, 4300, 4400, and 4500).
Pressure Limits:
: -20" Hg to 500 psig. (-0.677 bar to 34.4 bar).
Temperature Limits:
: 20 to 200°F (-6.67 to 93.3°C).
Size:
: 4" (101.6 mm) diameter dial face.
Mounting Orientation:
: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
: 1/4" female NPT high and low pressure taps, duplicated - one pair top for air and gas, and one pair bottom for liquids.
Weight:
: 3 lb, 3 oz (1.45 kg) aluminum case; 7 lb, 13 oz (3.54 kg) brass case.
Standard Accessories:
: Two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws and four surface mounting screws.