เครื่องมือวัด SOLARI-V

SOLAR I-V has been designed to meet any requirement of photovoltaic installation testers. Further to providing the possibility of testing and measuring the efficiency of single-phase photovoltaic systems and also measures the I-V characteristic both of a single module and of module strings. Thanks to SOLAR I-V, the operator can test the photovoltaic system and, should it give a negative result, immediately identify the problems of the system in order to promptly solve them. 

SOLAR I-V is provided with the remote unit SOLAR-02 for measuring irradiation and temperature. The synchronization between main unit and remote unit, by radio-frequency (RF) wireless connection, guarantees the necessary simultaneity of measurements. SOLAR I-V also manages a database of photovoltaic modules, which can be updated at anytime. 

The measured I-V characteristic is not affected by the resistance of the measurement cables, as it is carried out with the 4-terminal measuring method. The measured values, correctly reported at standard test conditions, are immediately compared with the values declared by the manufacturer to give the OK /NO result of the test. The operator must not do any calculation, the instrument carries out the comparison rapidly and automatically

• DC/AC TRMS Voltage
• DC/AC TRMS Current
• DC power
• AC active power on single-phase systems
• Solar irradiation [W/m2] with reference cell
• Temperature environmental and module by means of probe PT1000
• Synchronization with remote unit SOLAR-02
• Display of real-time irradiation and temperature
• Use of relationship to maximize the DC efficiency
• Recording of parameters with programmable IP (5s – 60min)
• Internal memory for data saving
• Recalling results on the display
• Optical/USB port for PC connection
• Help on line at display
• Measurement of output voltage from module/string up to 1000V DC
• Measurement of output current from module/string up to 10A DC
• Measurement of solar irradiation [W/m2] with reference cell
• Measurement of temperature, automatic or by means of probe PT1000
• Measurement of output DC and nominal power from module/string
• I-V curve test with direct measurement of Irr/Temp parameters
• I-V curve test by using of SOLAR-02 unit
• Measurement of the resistance of photovoltaic module series
• Mechanical inclinometer for detect correct solar irradiation
• 4-terminal measuring method
• Comparison with standard conditions (STC 1000 W/m2, 25°C)
• Evaluation of testing result: OK / NO
• Management of up to 30 types of PV modules
• Internal memory for data saving
• Recalling results on the display
• Optical/USB port for PC connection
• Help on line on the display

• SOLAR-02 : Remote unit for irradiance/temperature
• KITGSC4 : Set 4 cables + 4 alligator clips
• KITPVMC3 : Set of 2 adapters MC3 compliance
• KITPVMC4 : Set of 2 adapters MC4 compliance
• Alligator clip black, 4 pcs
• HT4004N : Transducer clamp 10-100A DC
• HT304N : Reference cell for radiation measurements
• PT300N : PT1000 probe for cell temperature measurement
• M304 : Mechanical inclinometer
• TOPVIEW2006 : Windows software + optical/USB cable C2006
• BORSA2051 : Soft carrying bag
• ISO9000 calibration certificate
• User manual on CD-ROM
• Quick reference guide

• MPP300 : Accessory for checks of SP/TP multi-string plants
• HT96U : Rigid clamp 1-100-1000A AC, diameter 54mm
• HT97U : Rigid clamp 10-100-1000A AC, diameter 54mm
• HTFLEX33D : Flex clamp 3000A AC, only for use with MPP300
• HT98U : Rigid clamp 1000A DC, diameter 50mm
• HT4004P : Rigid clamp 10-100A, only for use with MPP300
• HP30D1 : Rigid clamp with wide jaws up to 1000A DC
• SP-0400 : Set of straps for use of meter on neck
• KITPVEXT25M : Set 2 4mm banana cables, Green/Black, 25m lenght
• 606-IECN : Connector with magnetic test lead
• VA400 : Rigid carrying case
• ACON3F4M : Adapter for connection of DC clamps to MPP300