Honeywell V4297A1005 Solenoid Gas Valve

V4297A are normally closed solenoid gas valve. Suitable for use on furnaces, ovens, atmospheric burners, commercial water heaters, roof-top make-up air units, power burners, and commercial/industrial boilers.

• V4297A are used with 120 Vac controllers.
• Positive close off of gas flow when de-energized.
• High valve spring force allows up to 0.7 psi back pressure at valve seat.
• No inlet pressure influence at valve seat.
• Inlet pressure changes do not affect ability to close valve.
• Low operating noise.
• Low rush-in current.
• Upstream and downstream taps allows tapping and testing pressure points.
• For use with the Integrated Valve Train.
• Accepts C6097 Pressure Switch mounted directly to flange (upstream pressure tap only).

Dimensions (in.)

9 in. high x 5 3/4 in. wide x 5 5/8 in. deep

Dimensions (mm)

229 mm high x 147 mm wide x 143 mm deep

Materials

Body--Die-cast aluminum

Mounting

Directly bolted to Integrated Valve Train Components

Frequency

50 Hz; 60 Hz

Approvals, Underwriters Laboratories Inc.

Listed: File No. MH18476, V1, S1 - Guide No. YIOZ

Approvals, CSA

Certificate No. 158158-1154280, Guide No. C3371-03, 04, 83

Electrical Connections

Screw terminals

Voltage

110 Vac; 120 Vac

Operating Temperature Range (F)

-40 F to +130 F

Operating Temperature Range (C)

-40 C to +54 C

Approvals, Swiss RE

Acceptable

Current Ratings

0.2 max amps at rated Vac/Hz

Body Pattern

Straight-through, non-offset

Pressure Ratings (psi)

5 psi

Pressure Ratings (kPa)

34.5 kPa

Capacity (m³/hr)

19.8 m3/hr

Pressure Tapping

Inlet and outlet pressure taps-- 1/4 in. NPT

Type of Fuel

Air; natural; manufactured; mixed; LP

Pipe Size (inch)

3/4 in. to 1 1/4 in.

Pipe Size (DN)

DN20 or DN25 or DN32

Capacity (cfh)

650 cfh; 700 cfh; 780 cfh

Valve Opening Time

less than 1 sec

Valve Closing Time

less than 1 sec

Flanges

Required, Order Separately

Integrated Valve Train Body Size

Small body, small flow