โพสเมื่อ
ชื่อสินค้า
Thyristor switch
โค๊ดสินค้า
thyroswitch 2P
รายละเอียด:
Unlimited switching frequency without load on capacitors
No peak inrush current when switching on capacitors
Compensation almost in real-time
INPUT
| Control input: | |
10 – 30 V DC | max. 30 mA
180 – 260 V AC | 50 / 60 Hz | max. 20 mA | |
| Fuse protection: | |
Max. 6 A | |
POWER SUPPLY
| Auxiliary voltage: | |
230 V AC | 50/60Hz | max. 18VA | |
| Fuse protection: | |
Max. 6 A | |
LOAD CIRCUIT
| Connection voltage UN: | |
400/500 V | 50/60 Hz (type-dependent, see table) | |
| Load current: | |
70/90/115 A (type-dependent, see table) | |
| Power dissipation: | |
70 A type approx. 2.2 W per A
90/115 A type approx. 2.1 W per A | |
FIELD OF APPLICATION
| Creepage distances from control input to power circuit: | |
> 10.5 mm for SELV voltages | |
| Rated voltage: | |
UN ± 10 % | |
| Harmonics voltage: | |
DIN EN 61000-2-4 class 3 | THD max. 10 % | |
CLOSING DELAY TURN-OFF TIME > 5s
| Input: | |
DC: 0 up to max. 20 ms
AC: 10 up to max. 30 ms | |
RECLOSURE DELAY: CHOPPING OPERATION
| Input: | |
DC: 0 up to max. 33 ms
AC: 10 up to max. 43 ms | |
ELECTRICAL SAFETY
Standards and amendments
| Protection class: | |
I | |
| Distances: | |
EN61010:2001 for contamination degree II,
measurement category III | |
| Protection type: | |
IP 10
| |
ENVIRONMENTAL CONDITIONS
| Standards and following amendments: | |
DIN EN 60721-3-3/A2
(3K5 + 3Z11)
EC 721-3-3 (3K5 + 3Z11) | |
| Air humidity, non-condensing: | |
5 % to 95 % | |
| Operating temperature: | |
–5 °C to +55 °C - observe performance
restriction depending on ambient temperature.
Storage temperature: -25 °C to +70 °C | |
INSTALLATION
| Installation position: | |
Vertical or horizontal | |
| Cooling clearances: | |
Min. 50 mm to the fan and min. 150 mm to the heat sink outlet | |
HOUSING
| Sizes in mm (H x W x D): | |
220 x 105 x 185 mm
220 x 105 x 198 mm (type 115 A) | |
WEIGHT
| |
Approx. 2900 g
Approx. 3600 g (type 115 A)
| |
คำค้นหา:
switch thyristor