RC-DO Room controller with display

Technical data
Supply voltage 18...30 V AC, 50...60 Hz
Internal consumption 2.5 VA
Ambient temperature 0...50°C
Storage temperature -20...+70°C
Ambient humidity Max 90% RH
Protection class IP20
Display LCD with background illumination
Built-in temperature sensor NTC type, measuring range 0...50°C, accuracy ±0.5°C at 15...30°C
Material, casing Polycarbonate, PC
Weight 110 g
Colour Cover: Polar white RAL9010 Bottom plate: Light gray
CE mark. This product conforms with the requirements of European EMC standards CENELEC EN 61000-6-1 and EN 61000-6-3, and the requirements of European LVD standard IEC 60 730-1. It carries the CE mark.
Inputs
External room sensor

PT1000-sensor, 0…50°C. Suitable sensors are Regin’s
TG-R5/PT1000,TG-UH/PT1000 and TG-A1/PT1000.
Change-over alt. potential-free contact PT1000-sensor, 0…100°C. Suitable sensor is Regin’s TG-A1/PT1000.
Occupancy detector Closing potential-free contact. Suitable occupancy detector is Regin’s IR24-P.
Condensation detector alt. window contact Regin’s condensation detector KG-A/1 resp. potential-free contact
Outputs
Forced ventilation 24 V AC actuator, max 0.5 A
Valve actuator alt. thermal actuator 2 outputs
Valve actuator 0…10 V DC, max 5 mA
Thermal actuator 24 V AC, max 2.0 A
Control Heating or cooling
Actuator exercise FS = 23 hours interval
Terminal blocks Lift type for cable cross-section 2.1 mm2
Setpoint settings in the display
Basic heating setpoint 5...40°C
Basic cooling setpoint 5...50°C
Setpoint displacement ±0...10°C (FS = ±3°C)