รายละเอียด:
"Tester for checks on electric car recharging stations and verification of domestic and industrial electric systems"
CHECKS ON RECHARGING STATIONS
FOR ELECTRIC CARS
Connection is simple.
MacroEVtest is connected through the provided C100EV cable to EV-Test100, which is connected, through an in-built cable
provided with type2 plug, to a recharging station.
SIMPLIFIES
EV-Test100 can simulate the presence of a car being recharged and, at the same time, dialogues with MacroEVtest
thanks to the new display with touch screen system, peculiar to HT's latest generation devices.
SIMULATES
EV-Test100 can simulate the presence of a car being recharged and, at the same time, dialogues with MacroEVtest
thanks to the new display with touch screen system, peculiar to HT's latest generation devices.
GUIDES
To correctly perform all tests, all you need to do is following the GUIDED PROCEDURE created by HT for this innovative
instrument
CONNECTS
Before each test, MacroEVtest indicates how the cables must precisely be connected and, at the end of measurement,
further to the detected values, it provides evaluations of the tests' outcomes, if compatible or not for the recharging
station's safety, indicated by a green or red thumb symbol.
TESTS
? CONTINUITY test of the recharging station's protection conductor
? INSULATION test of the recharging station
? Verification of the STATUSES of the recharging station
? Measurement of OVERALL EARTH RESISTANCE
? Verification of the RCD's tripping (test of RCDs type A, B and type B 6ma)
VERIFICATION
TESTS AND
SIMULATIONS
? Vehicle not present
? Vehicle present but not being charged
? Vehicle present and being charged
? Events and anomalies which can be detected during the recharging phase
? Simulation of a fault on the protection conductor
? Indication of the presence of voltages on the EVSE output connector through LED
? Verification of the mechanical lock in the connection to the station: it is possible to check that the station,
during the recharging phase, blocks the cable release (if the station is provided with this function)
STANDARDS
IEC/EN 61851-1 and IEC/EN60364-7-722
SAFETY CHECKS ON PRIVATE
AND INDUSTRIAL SYSTEMS
MEASURES
The TFT colour display with touch-screen allows for a new and more versatile use of the instrument.
MacroEVtest offers on its display all possible alternatives for the performance of a perfect measurement.
PREPARES
The new system adopted by HT allows optimally preparing the instrument, before performing a test, by suggesting the most
suitable connections to certify correct and reliable tests.
The AUTO function, in the system menu, allows performing the tests very quickly
VALIDATES
At the end of each test, further to the measured value, MacroEVtest provides an evaluation of the result, indicating
whether it complies or not with standards.
All tests can be saved and, in order to create a printable report, data can be transferred via WiFi to a PC, smart phone
or tablet.
TESTS
? Test of RCDs type A, type AC also up to 1000 mA and type B. By using the accessory RCDX10,
provided with the instrument, it is also possible to test RCDs with external jaws up to 10 A.
? Insulation tests up to 1000V
? Continuity tests
? Tests of overall earth resistance and voltammetric resistance (further than with the provided rods, this
latter test can also be performed by means of the optional clamp T2100).
? With the appropriate programming guided by the touch-screen system, this device can test the
interruption power, tripping currents, I2t relevant to magneto-thermal switches (MCB) with curves B, C,
D, K and fuses type gG and aM
? Loop/Line impedance measurements and calculation of the assumed short-circuit current with high
resolution (0.1mOhm) in TN systems with the use of the optional accessory IMP57
STANDARDS
IEC/EN 60364
ภาพประกอบ: