MAVOLUX 5032 C USB luxmeter

Product Descriptions
With accuracy according to class C, the industrial luxmeter Mavolux 5032 C USB is primarily used for general applications.The smallest of four measuring ranges begins with an initial sensitivity of 0.1 lx. V(?) adaptation deviation, which amounts to f1‘ < 7.5 %, is considerably better than the admissible error limit for class C.

With the help of an optional luminance attachment with an acceptance angle of 15°, the meter can be used as an unclassified luminance meters. Luminance is measured in candelas per square meter (cd/m²) or footlamberts (fL), and defines the perceived brightness of a back-lighted or reflecting surface.

At GOSSEN, great emphasis is placed upon reliability by means of calibration. For purposes of documented evidence, a factory calibration
certificate or a DAkkS calibration certificate can be ordered along. Depending on how the meter is used, we recommend a calibration interval of 12 to 24 months.

Measuring Functions
• Illuminance [Lux] : 0.1 lx…199 900 lx/ 0.01 fc …19 990 fc
• Luminance : 1 cd/m²…1 999 000 cd/m²/0.1 fL…199 900 fL with optional luminance attachment, not classified
• Measuring ranges 4
• Measuring range selection : Automatic / Manual
• Measuring rate : 2 per second
• Measuring method : Distance measurement, Contact measurement with optional luminance attachment
• Measuring sensor : Silicon photodiode with V (?) filter
• Measuring cable : 1.5 m, firmly connected
• Measured value memory : 100 measured values
• Accuracy : ± 3 % of reading + 1 digit