Xantrex Solar charger

The Xantrex solar charger "C Series" offers three models.
The C35, C40 and C60 that can handle 35, 40 and 60 amps of DC current.
Silent, pulse width modulatied (PWM) high efficiency operation.
Three-stage battery charging (bulk, absorption and float).
Automatic overload protection in both active and passive modes.
PV array short circuit and reverse polarity proteciton.

Electrical Specifications		C35		C40		C60
Voltage Configuartions		12 and 24 VDC		12, 24 and 48 VDC		12 and 24 VDC
Maximum PV Open Circuit Array Voltage		55 VDC		125 VDC		55 VDC
Charging/Load Current (@25C)		35 amps DC		40 amps DC		60 amps DC
Maximum Peak Current		85 amps		85 amps		85 amps
Maximum Voltage Drop Through Controller		0.30 volts		0.30 volts		0.30 volts
Typical Operating Consumption		15 ma		15 ma		15 ma
Typical Idle Consumption		3 ma		3 ma		3 ma
Recommended Breaker Size		45 amps		50 amps		60 amps rated at 100% continuous duty
Recommended Wire Size		#8 AWG		#8 AWG		#6 AWG rated at 90C
Lead Acid Battery Setting		Adjustable		Adjustable		Adjustable
NiCad Battery Setting		Adjustable		Adjustable		Adjustable
Load Control Mode
Low Voltage Reconnect		Adjustable		Adjustable		Adjustable
Low Voltage Disconnect		User selectable manual or automatic reconnection - includes warning flash before disconnect and provides a one time, user selected grace period
Dimension (HxWxD)		8.0" x 5" x 2.5" (20.3cmx12.7cmx6.4cm)		10" x 5" x 2.5" (25.4cmx12.7cmx6.35cm)		10" x 5" x 2.5" (25.4cmx12.7cmx6.35cm)