Authentic Engineering Co.,Ltd.
บริษัท ออเธนทิค เอ็นจิเนียริ่ง จำกัด
โพสเมื่อ
PU Timing Belt ,Synchronous belt,Timing Belt,Megadyne,Machinery and Process Equipment/Belts and Belting
รหัสสินค้า
NANA-103949
ชื่อสินค้า
PU Timing Belt ,Synchronous belt
แบรนด์
Megadyne
โมเดล
T5 ,T10 ,AT10 ,AT20
ผลิตที่
อิตาลี
ผลิตจาก
โพลียูรีเทน
รายละเอียด:

MEGAFLEX TIMING BELTS

polyurethane, with continuous spiral steel cords.

This type of belt, developed by our Research & Development, offers

good running characteristics and high traction loads.

They are especially suited for power transmission and conveying with

high loads and high speeds (up to 10.000 RPM).

The addition of a nylon coating on the teeth during production

enhances the running properties for specific applications and reduces

the noise frictional coefficient.

An extra thickness of special coating is also possible on the back of the

belt offering extra protection against aggressive or heavy products.

Megaflex belts are truly endless, enabling them to deliver exceptional

performance.

are manufactured in thermoplastic

MEGADYNE MEGAFLEX TIMING BELTS ARE AVAILABLE FROM

1.500 UP TO 22.700 mm LENGTH.

MEGAFLEX

Special constructions

– High flex cords

– (NFT) nylon fabric on the teeth (available from 1.900 mm long)

– Custom milling, grinding and drilling to specification

– Additional continuos coatings on the back of the belt in:

– PU 85° ShA

– Tenax 50° ShA

– Linatex 40° ShA

– Yellow PUR 60° ShA

– Grey PUR 60° ShA

– Neoprene rubber 70° ShA

Other hardnesses available on request.

MEGALINEAR

polyurethane, that gives superior wear and abrasion resistance.

Various grades of steel cords offer good running characteristics, even

with high tractive loads.

Manufactured to tight tolerances, Megalinear delivers reliability and

excellent dimensional stability. The addition of a Nylon coating on the

tooth and/or the back of the belt during production, enhances the

running properties for specific applications. An extra thickness of

polyurethane is also possible on the back of the belt, offering extra

protection against aggressive or heavy products.

open length timing belts are manufactured in thermoplastic

MEGALINEAR

offers the following features:

MECHANICAL features

– Consistent dimensional stability

– Low pre-tension

– Low noise

– High abrasion resistance

– Low maintenance

– High flexibility

– Linear speeds up to 80 m/sec

– High precision linear positioning

CHEMICAL features

– Good resistance to – Aging,

– Hydrolisis,

– UVA rays,

– Ozone

– Working temperature: -25 ?? to +80 °C

(up to +110 °C for short periods)

– High resistance to oils, fats and greases

– Good resistance to most acids and Alkalis

– Compatible for fabrication with other thermoplastic materials

MEGALINEAR

jointed belts.

can be supplied as open length rolls, or as endless

OPEN LENGTH Belts

These are manufactured as continuous lengths, with the reinforcement

in a parallel configuration. Standard roll lengths are 50 or 100

metres. Other lengths available on request.

MEGALINEAR

motion drives.

belts as an open length are normally used in linear

ENDLESS JOINTED belts

By jointing using the thermoplastic properties of the open length belt,

endless belts can be produced to any length by welding. The finished

joint is resistant to fatigue from flexing and tension, due to the unique

symmetrical Vee shaped pattern of the joint.

Endless jointed belts are suitable for conveying applications, particularly

when indexing and/or positive drive is required. Supplementary

application of flights, profiles and coatings is possible, to suit specific

applications.

MEGALINEAR

such as, Keviar (K), High Flex (HF), High Performance (HP) and High

Performance Flex (HPF).

MEGAPOWER

moulding process.

The high-grade polyurethane gives excellent abrasion and shear

resistance, combined with a variety of graded steel cords, ensuring

high strength and tractive resistance. The result is a timing belt with

excellent dimensional stability. Megapower moulded timing belts are

manufactured to a tight tolerance range, which assures consistent

lenght and thickness.

The combination of these factors results in Megapower, performing to

the highest physical and chemical levels.

Special compounds and cords have to be tested and homologated on

the application. Megadyne is not responsable for wrong functioning

of special products.

timing belts are manutactured by a unique thermoset

MEGAPOWER PU

and control even with high speed.

These belts have the following features:

belts are suitable for high power, precision motion

MECHANICAL features

– Consistent dimensional stability

– Low pre-tension

– Low noise

– High abrasion resistance

– Low maintenance

– High flexibility

– Linear speeds up to 80 m/sec

CHEMICAL features

– Good resistance to – Aging,

– Hydrolisis,

– UVA rays,

– Ozone

– Working temperature: -25 °C to +80 °C

(up to +110 °C for short periods)

– High resistance to oils, fats and greases

– Good resistance to most acids and Alkalis

MEGAPOWER PU

and stepped drives, in office automation and domestic appliance

applications.

belts perform especially well on light synchronised
is also available with alternative reinforcement cords
คำค้นหา:
belt timing

บริษัท ออเธนทิค เอ็นจิเนียริ่ง จำกัด

Authentic Engineering Co.,Ltd.

32,34 ซ.อ่อนนุช 28/1 ต.สวนหลวง อ.สวนหลวง จ.กรุงเทพมหานคร 10250

02 332 7223-6
02 742 0828

Contact: นายณฎฐ์ภรรทร์ ศรีตุลานนท์