MEDENUS Gas Pressure Regulator type R 100

The gas pressure regulator type R 100* serves to ensure a constant outlet pressure when the inlet pressure or flow capacity varies. Design and construction of this unit allow for many applications. So the regulator can be used not only in gas distribution systems but also primarily in industrial gas burners and ovens where a short response time is required. Because of the exclusive use of spring loads, the installation is possible in any position.

Function:
The gas flows through the regulator housing in arrow direction. The main diaphragm is actuated via an impulse line from the outlet side by pressure. The required outlet pressure is adjusted at the spring. The valve remains open as long as the outlet pressure is below the set value. When reaching the set point the regulator valve closes.