เครื่องวิเคราะห์ความชื้น Moisture Metering

Test Time: 10 – 45 Minutes
Test Temperature: 50 – 210°C (adjustable in 1°C steps)
Sample Weight: 0.01 – 50 g
Reagent: CaH2-Pads / CaH2 granular form
Measuring Range: 0.2 – 25 mg (absolute)
0.0005 – 5% (relative)
Accuracy: Measuring error < 2%
Resolution: 1 ppm (0.0001%)
0.1 – 0.8 mg (depending on measuring range)
Ambient Conditions: -10…40°C / 90% rH (not condensing)
Power Supply: 100 – 240 VAC (50/60 Hz) / 1000 W
Weight: 6.4 kg
Dimensions: 290 x 180 x 260 mm (H x W x D)
Interface: USB
System Requirements: PC with min. WIN 7 SP 1 or later

Technical Specifications

HydroTracer FMX – The Standard Unit
The HydroTracer FMX was developed for the measurement of granules used in injection molding. This device is recommended almost all applications.

SPECIFICATIONS HydroTracer Type FMX
Measurement range absolute: 0.2 mg – 30 mg water
Measuring range relative: 0.0005% – 5% moisture content
Repeatability: 0.1 mg water (1 mg water content) to 0.5 mg water (20 mg water content)
Sample amount: 0.01 g to 30 g (50 g), depending on the density and moisture content
Sample volume HydroTracer FMX: 40 cm³ maximum
Measuring temperature: 50 ° C to 210 ° C selectable
Reagent: Calcium hydride powder, consumption per test approx. 0.1 g
Display via PC: Water content mg, % and ppm as well as air temperature, relative humidity and air pressure
Supply voltage: 230 Vac or alternatively 115 Vac or 100 Vac
Weight: 4.6 kg
Dimensions: 285 mm x 170 mm x 250 mm (height x width x depth)
Interface: USB System
Requirements PC: Windows 7/8/8.1/10


HydroTracer FLV – For Large Sample Volumes
The HydroTracer FLV provides an enlarged sample tray (depth 30 mm) for the measurement of materials with low bulk density (fibres, chopped foils, thin-walled regrind) and measurement of molded parts. The HydroTracer FLV is used also for testing materials with water contents lower than 50 ppm because a significant bigger sample weight can be used.

SPECIFICATIONS HydroTracer Type FLV
Measurement range absolute: 0.2 mg – 30 mg water
Measuring range relative: 0.0005% – 5% moisture content
Repeatability: 0.1 mg water (1 mg water content) to 0.5 mg water (20 mg water content)
Sample amount: 0.01 g to 150 g (300 g), depending on the density and moisture content
Sample volume HydroTracer FLV: 125 cm³ maximum
Measuring temperature: 50 ° C to 210 ° C selectable
Reagent: Calcium hydride powder, consumption approx. 0.1 g per test
Display via PC: Water content mg, % and ppm as well as air temperature, relative humidity and air pressure
Supply voltage: 230 Vac or 115 Vac or 100 Vac
Weight: 4.7 kg
Dimensions: 285 mm x 170 mm x 250 mm (height x width x depth)
Interface: USB
System Requirements PC: Windows 7/8/8.1/10