ASAHI KEIKI Process Monitor
Model : AS-243-3V-4
AS-243 : Process Monitor AS-243 Series
-
3V : Range : 0 to 10V
4 : Power Supply : DC24V
General Specification :-
Input Configuration : Single Ended
Input Bias Current : 2 mA (TYP.)
Conversion Rate : 2.5/sec
Normal Mode Rejection : 50dB (TYP.) (50/60 Hz)
Temp. Coefficient : Offset Display ±0.5 digit/°C
: Full Scale Display ±0.01% of Span/°C
Over Range Indication : When Input Exceeds the Maximum Display,
Display Flashes
Full Scale Adjustment : 100 to 9999
Offset Adjustment : ±5000
Span : 10000 Counts
Display : LED, 8 mm (Red)
Polarity : A “-“ is Displayed Automatically
Scaling : By Switch (rear) and Fine Volume (front)
Hold : COM and S/H terminal Shorted
Decimal Point : Settable to any digit position
Operating Temperature : 0 to 50°C 35 to 85%RH
Power Supply : DC 24V ±20%
Power Consumption : 30 mA at DC 24V
Dimensions : 24(H) X 48(W) X 87(D) mm DIN Size
Weight (Unit) : Approx. 50 g
Dielectric Strength :-
: Between input (Lo) and Mounted Panel, AC 1500 V/l min.
: Between input (Lo) and Power Supply (0V), DC 500 V/l min.
Insulation Resistance : DC 500V 100 MOhm or More at the above terminals
Accessory : Connector, Instruction Manual
Mfg. : ASAHI KEIKI CO., LTD.
Made in Japan