| Model 318 Specifications | |
|---|
| Temperature Range | |
-58°F to 300°F (-50°C to 150°C) | |
| Accuracy | |
+/-2°F (+/-1°C) | |
| Resolution | |
0.1°F | |
| Sample Rate | |
1 reading every 1.5 seconds | |
| Stem Length | |
2.8" | |
| Tip Type | |
Contact | |
| Water Resistant | |
Yes | |
| Water Proof | |
N/A | |
| °C / °F Selectable | |
Yes | |
| Data Hold | |
Yes | |
| Auto Off | |
Yes | |
| Battery Type | |
LR44 | |
319 Operating Instructions
To measure temperature with this unit follow these simple instructions:
Selecting Fahrenheit or Celsius mode:
- With the unit “OFF” press and continue to hold the ON/ OFF button.
- The LCD will alternate between °F and °C. Release the ON/OFF button when desired measurement mode appears on the LCD
- Remove the protective sheath from the stem.
- Press the ON/OFF button.
- Insert stem into area or object to be tested. At least 1/2” of the stem must be inserted.
Warning: The stem is a sharp and pointed object which can be dangerous.
The Data Hold function is used by pressing the D-H button when taking a measurement. The measurement will flash on the LCD when Data Hold is in use. To return to normal function, press and release the D-H button a
second time.
Press the ON/OFF button to end operation, or the unit will automatically power off after 35 minutes.
To reverse the LCD to suit your viewing angle:
Insert a small coin into notch in curved area “B”, then gently pry portion “A” from “B”. Shielded wires will keep the two parts connected. Twist the area “A” 180° and snap back into area “B”.